Quote Originally Posted by Lionel View Post
I've got a couple of hose clamps, so I'll put those on before I undo anything.

As you say, it should be fairly straightforward - except my wife HATES pumping the brake pedal.

Cheers,

Lionel
You can leave the wife in the house I always do brake bleed by myself I just make a siphon bottle set up.

Old coke bottle lenght of clear hose, drill a hole in the neck of the bottle and feed the hose down into the bottom of the bottle, put a small amout of fluid in the bottle so to cover the end then possi said bottle up on suspension so the hose goes up from the bleed nipple that way when bleed any air always goes up away from the nipple.

This way you can just crack the nipple and pump away at the pedal then just check the hose is free from bubbles, once clear close the nipple and repeat for each wheel.

hope that makes sense I've used this process just about every time and never had a problem just make sure your ignition is off while doing it with any abs car.

cheers Brian