Results 1 to 4 of 4

Thread: 130 Puma stalls & won't restart -fuel starvation?

  1. #1
    1N3U0T Guest

    130 Puma stalls & won't restart -fuel starvation?

    Well I thought it was a one off, stalling, then cranking over but won't start, turn key off for 30 sec then a few cranks and it starts??

    The unfortunate bit is it's happening under extreme off-road climbing events.
    Replaced fuel filter at the rear near tank, new high pressure sensor, new VCV, new injectors, new air filter and still stalls?

    Once it got a bit hairy as even reverse start failed as it would not start!

    Am I missing something here?

    Due to the angle is there fuel starvation or an oil level sensor in oil sump, stopping -restart attempts?

    Thanks

    Cheers,

    Leon

  2. #2
    Join Date
    Oct 2014
    Location
    Fremantle
    Posts
    189
    Total Downloaded
    0
    crankshaft position sensor??
    worth a check

  3. #3
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Fill the tank full with a jerry and see if it does it,if it does fit a second breather. Pat

  4. #4
    austastar's Avatar
    austastar is offline YarnMaster Silver Subscriber
    Join Date
    Jul 2009
    Location
    Hobart
    Posts
    3,532
    Total Downloaded
    0
    Hi,
    Have had similar on Puma to 130 cab chassis. Very scary as we were miles from anywhere.

    Turn off, lock, open and restart seemed to fix it.

    It seemed to happen if I stalled by using a gear too high for the conditions, usually at very low speed like 3 point turns etc.
    Cheers

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!