My 90's thread

[RoverChris]

You should put some sort of heat insulation on the underside of the exbox as I found it gets quite hot in there on long trips.I retro fitted some and it's a pain in the arse,best to do it before you fit it in your vehicle.

Thanks for the tip, when it arrives I will have a look and see what I can do

[AlecW]

My next priority is to dynamat the front but I will do that when my exbox arrives as I will already have to remove seats and panels to fit that and that job should take up the rest of the dynamat I have. After that I'll need to get some more and the roof is the next priority as well as putting some decent insulation up there to try and deal with the heat.

Have you noticed a lot coming through? Thought it would be reasonable seeing as though you have white paint. Shouldnt take too much hopefully

[RoverChris]

Have you noticed a lot coming through? Thought it would be reasonable seeing as though you have white paint. Shouldnt take too much hopefully

Nothing over the top, it's just being in townsville it's always hot so anything I can do to reduce it is worthwhile.

[AlecW]

Nothing over the top, it's just being in townsville it's always hot so anything I can do to reduce it is worthwhile.

I got ya, lived there for 4 involuntary years and can be oppressively hot sometimes.

[the_goat_in_boots]

https://www.flickr.com/photos/139265...7662826030740/

[the_goat_in_boots]

[/URL][/IMG]

[RoverChris]

[IMG][/IMG]

Very nice, what's that you have on the air vent?

[AlecW]

That is a snow cowl, good for keeping some dust and water out of the intake aswell. I wants one soon

[noyakfat]

The "bar fridge" looks great in it's crisp white. It will look even better with a bit of dirt. Congrats and enjoy

[RoverChris]

Just put the ladder on the back of the defender.

I was a bit nervous about drilling the holes through the panel but luckily they turned out alright.



Heres the finished product