Results 1 to 10 of 10

Thread: Sydney Panel Beater - Defender

  1. 30th May 2016, 04:51 PM #1
    Matthewv Guest

    Sydney Panel Beater - Defender

    Ok so I've done a bit of research and turned up very little... I'm looking for recommendations of Sydney based panel beaters (or paint-less dent removers?) that sympathize with the Defender cause.

    My Deefer was nudged while parked and sadly the culprit did a runner. Yep, it's a very little nudge - more annoying than anything!

    I've had one quote and it's quite a bit more than I expected... so I'm keen to find a comparison price or two. Can anyone recommend somewhere that understands?

    All suggestions appreciated!


    Matt
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 30th May 2016, 05:24 PM #2
    Dopey
    Dopey is offline Master
    Join Date
    Feb 2013
    Location
    Sydney, NSW.
    Posts
    542
    Total Downloaded
    0
    Quote Originally Posted by Matthewv View Post
    Ok so I've done a bit of research and turned up very little... I'm looking for recommendations of Sydney based panel beaters (or paint-less dent removers?) that sympathize with the Defender cause.

    My Deefer was nudged while parked and sadly the culprit did a runner. Yep, it's a very little nudge - more annoying than anything!

    I've had one quote and it's quite a bit more than I expected... so I'm keen to find a comparison price or two. Can anyone recommend somewhere that understands?

    All suggestions appreciated!


    Matt
    Prestige auto salon,
    68 South Street, Rydalmere.

    I have found that they are very good.
    They are currently replacing the roof of one of my 90's that has corrosion in it (warranty repair).

    They have previously done other work on this 90, also warranty work as well and the work that they have done has always been of a very high standard.

    They are Jaguar / Land Rover approved repairers too.

    If you go there, see Matthew Sinai, he is a specialist in working on Defenders.....

    Regards,
    Mike.
    Reply With Quote Reply With Quote
  3. 30th May 2016, 05:32 PM #3
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Matt that is a difficult repair to do and painting/ blending will cost a fair amount.

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  4. 30th May 2016, 05:50 PM #4
    MR LR
    MR LR is offline ChatterBox
    Join Date
    Apr 2009
    Location
    South Sydney
    Posts
    2,499
    Total Downloaded
    0
    Now that Caldwells are retired, my go-to is Corbans, who just moved from Hurstville to Peakhurst.

    They are Land Rover approved (or at least were when my family was in the game).
    Reply With Quote Reply With Quote
  5. 30th May 2016, 05:55 PM #5
    Babs Guest
    Quote Originally Posted by 90@ View Post
    Prestige auto salon, 68 South Street, Rydalmere. I have found that they are very good. They are currently replacing the roof of one of my 90's that has corrosion in it (warranty repair). They have previously done other work on this 90, also warranty work as well and the work that they have done has always been of a very high standard. They are Jaguar / Land Rover approved repairers too. If you go there, see Matthew Sinai, he is a specialist in working on Defenders..... Regards, Mike.
    I can second this Recommendation, they definitely know their Land Rovers. They have recently reinvested in new spray booths and are operating state of the art equipment.

    Ha ha ha 😀 I think Mathew became a Defender expert after my last MY12 Defender went there under warranty. They stripped the whole car inside removed all panels sealed everything back up made it all water tight. My last truck was in there for almost 2 months. All factory rivets were supplied by Land Rover everything looked OME but better when I got it back.

    I hope you are going through insurance as prestige won't be cheap but I can guarantee it will be the best work you will be able to find. I wouldn't let my truck go anywhere else. ✅✅✅

    Sent from my iPhone using Forum Runner
    Reply With Quote Reply With Quote
  6. 30th May 2016, 06:16 PM #6
    manofaus's Avatar
    manofaus
    manofaus is offline Master
    Join Date
    Feb 2014
    Location
    upper hunter
    Posts
    154
    Total Downloaded
    0
    Could just fit these
    Landrover Tuning :: Rear corner protection for Defender 90
    Reply With Quote Reply With Quote
  7. 30th May 2016, 06:39 PM #7
    Chenz's Avatar
    Chenz
    Chenz is offline Wizard Subscriber
    Join Date
    Jan 1970
    Location
    Melrose Park NSW
    Posts
    1,559
    Total Downloaded
    0
    These guys in Gladesville did a great job fixing the roof on my Deefer when the roof racks crashed and put some nice holes up top.

    Georges Smash Repairs
    15 Buffalo Rd, Gladesville NSW 2111
    Phone:9817 7301

    George loves a chat but his guys do excellent work
    Chenz
    I do not wish to be a member of any club that would have me as a member

    Former Owner of The Red Terror - 1992 Defender 200Tdi
    Edjitmobile - 2008 130 Defender
    Reply With Quote Reply With Quote
  8. 30th May 2016, 07:00 PM #8
    Matthewv Guest
    ...perhaps I forgot to mention I'm a tight-ar$e... I hadn't planned to use insurance but I'm now beginning to reconsider!

    Got to ask the question - what's the 'corrosion in the roof' story??
    Reply With Quote Reply With Quote
  9. 30th May 2016, 07:39 PM #9
    cuppabillytea's Avatar
    cuppabillytea
    cuppabillytea is offline Loud Mouthed Rat Bag Gold Subscriber
    Join Date
    Apr 2015
    Location
    Lillyfield NSW
    Posts
    7,823
    Total Downloaded
    0
    I've got a matching one on the left side.
    Cheers, Billy.
    Keeping it simple is complicated.
    Reply With Quote Reply With Quote
  10. 30th May 2016, 07:55 PM #10
    Dopey
    Dopey is offline Master
    Join Date
    Feb 2013
    Location
    Sydney, NSW.
    Posts
    542
    Total Downloaded
    0
    Paint is bubbling and coming off around the alpine Windows, the seals on the alpine Windows were replaced by the Land Rover dealers workshop at Parramatta (or one of their contractors) under warranty as they had split and were leaking....
    A few months after that, the paint started to bubble up and corrosion started to come through.

    The replacement alpine window seals split and leaked shortly after that, every time that my 90 went to that dealerships workshop for repairs, it came back worse.... And often with other added problems....

    Also the sealing seam between the front sloping roof and the rear roof was leaking on both sides.

    Also the roof gutter at the front right side just near where the windscreen adjoins was leaking very badly, the paint was coming off too.

    The roof was looking like a banana when viewed from side on, when originally installed at the factory, the side panels where not fastened properly and were loose allowing the roof sides to bow out...

    The Puma (TDCi) roofs are nowhere near as well constructed as the earlier roofs were, the earlier 90,110, etc, had galvanised roof gutters giving better strength and shape to them.

    If your Defender is still in warranty, check for corrosion and seam leaks on it, I think that the body has a 5 year corrosion warranty on it (only as long as the yearly corrosion check has been done by an authorised Land Rover place).

    Another place to check for corrosion is on the window blocks (that hold the base of the windscreen onto the firewall), the newer alloys that are used quite often corrode right through or crack completely through...

    Galvanic reaction and electrolytic corrosion on defenders is a bitch, If attaching anything made of dissimilar metals on your Defender, try and use a barrier like duralac (a anti-corrosive jointing compound) between the dissimilar metals.

    Mike.
    Reply With Quote Reply With Quote
« Fitting Rhino Racks | Coil and airbag combos »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!