Reply With QuoteYears ago I bought a RRC with a non-standard diode pack that didn't have the required terminal so a pick-up wire was fitted to 1 phase. The rear cover had to be removed to attach the wire.
Master
SupporterHello all,
Search didn't yield the answer I was looking for, so......
I am trying to locate and connect to the signal terminal on my alternator (2005 TD5). This is a stock photo of the alternator:
Alt.JPG
Would any of you know where the signal attachment/ terminal is?
Background: I have installed the non-TD5 VDO Tachometer and have read that the signal from pin-19 of the ECU is not strong enough for the non-TD5 specific tach.
Swaggie
Years ago I bought a RRC with a non-standard diode pack that didn't have the required terminal so a pick-up wire was fitted to 1 phase. The rear cover had to be removed to attach the wire.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Major part of the heart and soul of AULRO.comCan you see a terminal marked "W"?
See TD5 alternators "W'' terminal??
If not, see Adding a W terminal to alternator
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks