Printable View
Dropped it in to the dealer to have a new evaporator fitted after 18 months with no aircon. After weighing up the effort of pulling the dash myself and getting a new evap I figured the dealer was the best way to solve an expensive and time consuming problem.
Regards,
Tote
My Puma clock bulb had blown and I wanted to upgrade to LED so ordered T3 red and green bulbs. Used the base of original as platform and super glued T3 bulb on. Turned out to be the green bulb so factory match.
https://uploads.tapatalk-cdn.com/202...6a25ece514.jpghttps://uploads.tapatalk-cdn.com/202...4f5c815323.jpghttps://uploads.tapatalk-cdn.com/202...a86e935e80.jpghttps://uploads.tapatalk-cdn.com/202...a3dd314bde.jpg
Front A-pillar billet grab handles, door handles, and optimill heater controls added. Replaced the cig lighter with voltmeter/USBs and fitted corner protectors. Everything except heater controls sourced from Aliexpress and the quality is 10/10.
https://uploads.tapatalk-cdn.com/202...110cc1fbc2.jpghttps://uploads.tapatalk-cdn.com/202...ed902440c1.jpghttps://uploads.tapatalk-cdn.com/202...70c6bc7d66.jpghttps://uploads.tapatalk-cdn.com/202...41da90620f.jpghttps://uploads.tapatalk-cdn.com/202...17abe888cb.jpg
Looks [emoji102] very cool! How did you get the correct position for the grab handles? Often thought of installing those. Do they seem/feel solid?
Any links?
Cheers - Simon
Aluminum Alloy Inner Door Grab Handle For Land Rover Defender 90 110 04-18 Car Interior A/b-pillar Handle Decoration Accessories - Interior Mouldings - AliExpressQuote:
Originally Posted by travelrover
They fit into existing trim cover screw holes and are nice and solid.
Fixed link ^
Not me but my daughter. I collected her 90 to have it serviced, get her checked over for the annual road worthiness test in August and to have a few things fitted that she got for her birthday (it is always stuff for the 90 for birthdays and Christmas etc). With her 90 she uses it for her horsey stuff aswell as the normal business, so when she gets mine she does the same with it! I'll have to clear out the straw when I get the 110 back! So she sent this photo this morning with the following quip "When's the last time masai was off tarmac haha" Masai being the 110.
Installed silicon intercooler hoses(Puma 2.2, 2015], well at least I’ve done the two main ones. There’s another wee elbow one that I’ll have to put the thinking cap on. Don’t know how I’m going to get that installed without removing a ton of other pipes and wiring.
what a bastard of a job!
And here was I, thinking that all Irish Land Rovers were permanently bogged, or is that just the Turf Cutters.Quote:
Originally Posted by spudfan
From a few years agoQuote:
Originally Posted by cuppabillytea