Results 1 to 9 of 9

Thread: 2000 td5 w/ lt230 & r380 penrite oil question

  1. #1
    Join Date
    Jan 2016
    Location
    Newcastle
    Posts
    14
    Total Downloaded
    0

    2000 td5 w/ lt230 & r380 penrite oil question

    Hey all,

    I know this has been done to death and a few veterans will be bashing their head as if they've seen another 235/255/285 tire debate but i've read the good oil on the forum and come out the other end just as indifferent.

    I've got some penrite progear full synthetic 75w-90 oil for the lt230. Will this be alright for the R380 as well? I've been recommended this by a trusted shop but everywhere I read say don't go more than a 75w-85 in the r380 for the oil pump's sake. I've just been thrown off by the advice of the shop thats been nothing but knowledgable and helpful the past year. Won't hurt me to use the second bottle for the front diff if they're off. Getting vey mixed reviews on what to put in the rear Sals as well, any advice on a penrite oil for this would be awesome.

    Thanks in advance,
    Isaac.

  2. #2
    Join Date
    Sep 2016
    Location
    Queensland
    Posts
    17
    Total Downloaded
    0
    Hi mate, the 75/90 will be fine in the R380 and as for the Salisbury I run Penrite gear oil 85W 140 but I know a lot of blokes run Penrite gear 80W 90. They both do the job fine.

    Sent from my SM-G900I using AULRO mobile app

  3. #3
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Defender boy View Post
    Hi mate, the 75/90 will be fine in the R380 ...
    Sorry, but no it won't. The viscosity of the Penrite 75W90 is 6x higher at -40, 2x as high at 40oC and about 50% higher at 100oC - compared to oils like Castrol Syntrans and MTF94 (OE Spec).

    Basically it is too thick.
    It would be fine for the t-case and front diff, but probably a waste of money.

    The Sals runs hot (hypoid gears) so it is best to put 85W140 in it.

  4. #4
    Join Date
    Jan 2016
    Location
    Newcastle
    Posts
    14
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Sorry, but no it won't. The viscosity of the Penrite 75W90 is 6x higher at -40, 2x as high at 40oC and about 50% higher at 100oC - compared to oils like Castrol Syntrans and MTF94 (OE Spec).

    Basically it is too thick.
    It would be fine for the t-case and front diff, but probably a waste of money.

    The Sals runs hot (hypoid gears) so it is best to put 85W140 in it.
    Thanks mate, why a waste of money to put in the transfer and front diff? From all accounts i've heard 75-90 is good for the transfer or do you mean a more inexpensive oil would be a better idea for this?

    Thanks again,
    Isaac.

  5. #5
    Join Date
    Jan 1970
    Location
    cairns
    Posts
    1,675
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Sorry, but no it won't. The viscosity of the Penrite 75W90 is 6x higher at -40, 2x as high at 40oC and about 50% higher at 100oC - compared to oils like Castrol Syntrans and MTF94 (OE Spec).

    Basically it is too thick.
    It would be fine for the t-case and front diff, but probably a waste of money.

    The Sals runs hot (hypoid gears) so it is best to put 85W140 in it.
    In addition to the above the Penrite 75w-90 is a GL5 rated gear oil.
    The R380 requires a GL4 so ok for diffs and T/c but not for the box.
    Penrite do a 70w75 GL4 and a 75w85 GL4 both considered suitable for the R380. Depending on who you talk to

    FWIW I run Redline MTL and it is the best lube I have had in the box.

    Paul.
    Paul.

    77 series3 (sold)
    95 300Tdi Ute (sold)
    2003 XTREME Td5

    I thought I was wrong once, but I was mistaken.

  6. #6
    Tombie Guest
    The answer was as simple as looking at the Penrite page:





  7. #7
    Join Date
    Jan 2016
    Location
    Newcastle
    Posts
    14
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    The answer was as simple as looking at the Penrite page:




    Yes thanks mate I have done this...and will follow this. What threw me off was a very reputable and trusted shop who have not yet led me astray, pointing me elsewhere and thought it would not hurt anyone to run it by the forum as with many things I see people can often find better alternatives to suit the conditions we are in outside of the factory recommendations.

    Take it easy,

    Isaac.

  8. #8
    Tombie Guest
    All good Isaac...

  9. #9
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Isaac12277 View Post
    Thanks mate, why a waste of money to put in the transfer and front diff? From all accounts i've heard 75-90 is good for the transfer or do you mean a more inexpensive oil would be a better idea for this?

    Thanks again,
    Isaac.
    It is the right grade of oil and won't do any harm, however the front diff and t-case are not prone to excess wear, so less expensive non-synthetic EP80W90 will be fine.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!