Thread: Shingleback Water Tank

Hi All
Has anyone got any pics of how they have setup their Shingleback water tank?
Pumps, outlets etc? I have a 130DC.

These look to be a great solution to carrying a good amount of water.

TIA,
Michael

I’ve got a right tank on our 110 plumbed in for fuel with a dash transfer switch.
I’ve got a duel gauge in the dash and the wires are run for the 2nd tank sender.
Once the left tank is available I’ll be setting it up for water so watching to see people have done.

My thoughts at this stage are a 12 volt pump same as our camper so they can be swapped if needed and wired to the aux battery.
Id like the switch external so probably mount it under the number plate light housing where I have another switch now.
The outlet may be a tap mounted somewhere left of centre at the rear, need access to the step and usable with a trailer on.
Fill point may be a quick connect with a cover for mud etc. breather possibly running up behind tail lights.
The breather has to allow air out when filling and in when in use.
The other alternative is to use rum 2 breather hoses, using one as a fill point also.