Thread: Defender transfer case leak

Hi guys some help wanted
Transfer case has a leak but not from the inter shaft but seems to be coming from the screw in the photo
Would would you all do

Looks like the grub screw for the hi/low detent spring and ball.

*small wire brush, brake clean before you remove screw. (careful as there is a spring and ball, should stay put)
*Count how many turn to remove it.
*spray a tiny bit of brake clean in hole/thread.
*clean screw, put some thread seal compound, or if nothing else some sealant.
*screw in grub screw to the same amount of turns to remove (I think the setting is screw in until seated, then out 2 or 2.5 turns out)