- 
	
		
                        
                                
                                        
                                                25th August 2019, 08:08 AM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			Electrical Gremlins
		
 
			
				
					Hello, 
 Just noticed the other day that my volt meter was fluctuating wildly, put the nanocom on and the voltage varies between 13.5 and 15, then after a few minutes running settles down to varying between 14.7 and 13.7.
 
 Both batteries only at most 2 years old. All connections seem tight.  240000 kms on clock with orignal alternator, anyone got any ideas?
 
 Oh the dual battery system is by traxide.
 
 I’d rather solve the problem now than get stuck somewhere with no power.
 
 Thanks.
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                25th August 2019, 08:22 AM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Is the volt meter on your crank or house battery. 
 Which ever one it is, do you know what the other is doing
 
 Cheers Glen
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                25th August 2019, 11:37 AM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					One is coming off the power feed to the ignition. The other is the nanocom
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                25th August 2019, 06:29 PM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					Found problem. One nut on the amp meter didn’t have a spring washer and as such the nut could move about 10 degrees so the contact wasn’t the best. Put spring washer in and all good
				 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	Tags for this Thread
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks