Thread: Traction control light stuck on after replacing hi-beam blinker switch

Yes it will be the steering angle sensor. It will be reading something other than 0 degrees at the straight ahead.

If it's all been apart then most likely it hasn't gone back in the right spot. If memory serves, there is more than one way the sensor can go back in, so it would be worth pulling the steering wheel off again to have a look.

The light should reset with the ignition and if its ok will stay off.

If that doesn't work then you'll need to get it recalibrated, which is a very simple process if you have an IIDtool. Otherwise I think you'd need to go somewhere with a diagnostic computer - I couldn't find another way to do it when I had to do mine.

Cheers,
Jon