Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Puma Floor Matting

  1. #1
    Join Date
    Jul 2007
    Location
    Brisbane North
    Posts
    990
    Total Downloaded
    0

    Puma Floor Matting

    My original floor matt is beyond a joke now. I was going to install the Exmoor mat but am struggling to justify the price and it seems hard to install.

    Does anybody know if there has been an improvement in quality of the current LR offering (LR068974) or is it still paper thin?

  2. #2
    Join Date
    May 2013
    Location
    Bittern Vic
    Posts
    516
    Total Downloaded
    0
    i got some sheet rubber from Clark rubber and put over the original mat.
    This has removed the hole problem for a while.

    Ian
    Bittern

  3. #3
    Join Date
    Sep 2014
    Location
    Melbourne
    Posts
    193
    Total Downloaded
    0
    I went with these to cover up the heel hole, very solid and do the job fine.

    Genuine Land Rover Defender Front Floor Rubber Mats Set Part VPLDS0147 | eBay

  4. #4
    Join Date
    Feb 2007
    Location
    Yass NSW
    Posts
    5,599
    Total Downloaded
    0
    Quote Originally Posted by filcar View Post
    I went with these to cover up the heel hole, very solid and do the job fine.

    Genuine Land Rover Defender Front Floor Rubber Mats Set Part VPLDS0147 | eBay
    Its worth checking your Land Rover dealer for a price on a set of those, I got mine at a discount as they were on clearance.

    Regards,
    Tote
    Go home, your igloo is on fire....
    2014 Chile Red L494 RRS Autobiography Supercharged
    MY2016 Aintree Green Defender 130 Cab Chassis
    1957 Series 1 107 ute - In pieces
    1974 F250 Highboy - Very rusty project

    Assorted Falcons and Jeeps.....

  5. #5
    Join Date
    Jul 2007
    Location
    Brisbane North
    Posts
    990
    Total Downloaded
    0
    I planned in getting floor mats as soon as I replaced the original

  6. #6
    Join Date
    May 2014
    Location
    East fremantle
    Posts
    677
    Total Downloaded
    0
    Quote Originally Posted by filcar View Post
    I went with these to cover up the heel hole, very solid and do the job fine.

    Genuine Land Rover Defender Front Floor Rubber Mats Set Part VPLDS0147 | eBay
    i have had these since new - coming up to six years ago - and they are still going strong.

  7. #7
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    Anyone replaced the matt that goes under and around the front seats,on the puma 110?
    I can't believe how poor the quality of the original is,its just falling apart.

    Anyway,been looking around,freight seems ridiculous from some suppliers.

    Maybe try LR spares tomorrow?

    Yes i will sit-down when they give me the price.

  8. #8
    Join Date
    Nov 2011
    Location
    Brisbane
    Posts
    391
    Total Downloaded
    0
    I replaced it with the Exmoor Trim moulded matting system as mine was disintegrating. Freight was a huge cost of it due to the weight, and i had to get help to manhandle it into position when fitting and it took a couple of goes to get it looking ok as I had to cut my own holes.

    It does look much better than the original disintegrated matting.

    Richard
    _____________________
    1985 V8 County 110
    1994 TDI Discovery 1
    2000 TD5 Discovery 2
    2010 TDCI Defender 110

    Land Rover Owners Club of Brisbane

  9. #9
    DiscoMick Guest
    It is useless, isn't it. I haven't bothered replacing ours, as the hard backing falls out.

  10. #10
    Join Date
    Sep 2007
    Location
    Ireland
    Posts
    1,911
    Total Downloaded
    0
    If it is just to cover the seat box, you could get this
    Loadspace Mat - 109/110 5door Rear Tub - Paddock Spares
    Loadspace Mat - 109/110 5door Second Row - Paddock Spares
    Or this is a heavier rubber and a bit more expensive from Bearmach
    https://bearmach.com/rubber-mat-load...hicles-ba-2484
    and cut it and stick it on. It is not heavy duty but for the price it good value. The seat box is just three sides which can be easily measured and cut i.e. two sides and a front. The piece than goes under the seats usually gets cut away to allow access to the seat boxes. I put one in the back of a 110 years ago and it is still in use. Anyway just an idea if you are stuck.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!