FYRLYT install onto RIJIDIJ Bar

**W&KO** · 28th May 2021, 08:48 AM

Going to see how these go before we depart on our trip.

Lights mounted upside down on the existing tabs that were provided for the light bar that was supplied with the bar.

Had to consider the operation of the PTO engagement lever, just enough room.

Discovered we have no headlights, have no idea for how long. This switch isn’t all that old and looks perfect.

Off to gather some cable, fuses, relays to complete the install.

**Tombie** · 28th May 2021, 09:54 AM

That’s a lot of radiator you’ve got covered.

I went this way…

I’ve also removed the cover from the winch and replaced with a flat plate mounted to it to prevent additional air restriction and protect the rope.

As well as changed the LED bar for a slimline unit that is more than enough for close illumination whilst improving airflow.

**W&KO** · 28th May 2021, 10:20 AM

Originally Posted by Tombie

That’s a lot of radiator you’ve got covered.

I went this way…

I’ve also removed the cover from the winch and replaced with a flat plate mounted to it to prevent additional air restriction and protect the rope.

As well as changed the LED bar for a slimline unit that is more than enough for close illumination whilst improving airflow.

Pretty sure in the FYRLYT Review thread you mention they’d be fine in front of radiator

, I’ll go check as I might have read wrong.

**W&KO** · 28th May 2021, 10:24 AM

Originally Posted by W&KO

Pretty sure in the FYRLYT Review thread you mention they’d be fine in front of radiator

, I’ll go check as I might have read wrong.

I see you mentioned your setup with light bar, ‘‘twas awhile ago and was going off memory, though you had them mounted inside the bar.

Will monitor temps.....I’m not allowed have lights or antennas mounted above the bar

Thread: FYRLYT install onto RIJIDIJ Bar

Thread Tools