Results 1 to 9 of 9

Thread: fitting polyairs to a 95 110

  1. #1
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB

    fitting polyairs to a 95 110

    Hi

    got my polyairs for the rear of the 110.

    bit more involved in fitting them compared to the disco units.

    top plates that need to be bolted to the top of the top spring mount.

    anyone got a pic of how theirs are fitted as i would be very interested to see where they drilled to bolt them on.

    TIA
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  2. #2
    Join Date
    Feb 2008
    Location
    Sandstone Point Qld
    Posts
    634
    Total Downloaded
    0
    Gday Inc

    Iam not sure how to install them but we have them in the back of our 110 when we bought it so if ya want to duck around the corner tomorrow and have a look your more then welcome mate.

    Azza

    The missus said she will most likely be home all day as its her car not mine ...I get the hyunda to drive to work...

  3. #3
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    or pop into M R and check mine out

  4. #4
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    Quote Originally Posted by MacFamily View Post
    Gday Inc

    Iam not sure how to install them but we have them in the back of our 110 when we bought it so if ya want to duck around the corner tomorrow and have a look your more then welcome mate.
    mate, would love too, but i wont see daylight this week... you home on the weekend?
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  5. #5
    Join Date
    Jan 1970
    Location
    Camp Hill Queensland
    Posts
    775
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    Hi


    anyone got a pic of how theirs are fitted as i would be very interested to see where they drilled to bolt them on.

    TIA
    Yep. See here for photos

    Fitting Air bags, Defender
    '95 110 300TDI, F&R ARB Lockers, Twine Shower, Aux Sill Tank, Snorkel, Cargo barrier, 9 seats, swingaway wheel carrier, MadMan EMS2
    '85 110 Isuzu NA 4BE1 3.6l Diesel, 0.996 LT-95, Rear Maxi (SOLD)
    '76 SIII 109" Nissan ED33 5-SP Nissan GBox (SOLD)

  6. #6
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    thought there was a search button at the top of the page.......

  7. #7
    Join Date
    Feb 2008
    Location
    Sandstone Point Qld
    Posts
    634
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    mate, would love too, but i wont see daylight this week... you home on the weekend?
    Just gotta take the little girl to swimming lessons sat morning then do a little shopping but should be home sat arvo .

    I just went out to have a look at the poly bags and the top plate on ours has been welded on so Iam not sure if this is gunna help you mate...Offer still there if you still want to have a look.
    Azza
    Last edited by MacFamily; 1st April 2008 at 07:36 PM.

  8. #8
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    Quote Originally Posted by weeds View Post
    thought there was a search button at the top of the page.......
    ~~~~~~~~~~~~!
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  9. #9
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    It is fairly easy, drill four holes in your top spring plate outer, as close to the edges as you can to allow your spring to seat properly. Lay plate on top and mark. Drill plate and bolt in.



    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!