Moderator
Haven't measured in a while, but last time I tried it, hte 130CC fit under a 2.2 bar and didn't at 2.1.
Guess Edd gets the gold.
Cheers
Simon
RoverLord
what the hell, you dont get to be my dive buddy.....Originally Posted by philco
agreed, it does sound high. 2.250m high would be approx 88.58 inches/12ft4 inches. so i spose it means you got a 9 & 3/4 inch lift, man thats good height!!!!!!!!! any woman would be proud to have a hubby with thatand need a step ladder to get in.
6ft is 1.8m near enough another foot (30cms) takes it to 2.1m add 6 inches (15cms) and I get 2.25 at lets see
6ft +1ft +6 inches =7foot 6 inches.. or thereabouts.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
YarnMaster
SupporterIs that 2.25m to the top of the cab or to the head board etc.
My measurement was 1995mm (2m) - ground to a piece of pipe I placed running widthways across the back of the cab.
An extra 25cm would have to be what 100mm of spring 50mm of body lift and then 40" swampers or something???? Unless of course TD5 130s sit 25cm higher than tdis?
My boat rack limits me to 2.25m too but the top of the cab is 2m.
S
'95 130 dual cab fender (gone to a better universe)
'10 130 dual cab fender (getting to know it's neurons)
Master
blacknight aus , Dave you are right, i was getting all excited and added my inches wrong, put in a couple of feet more than i needed, probably tripped over my tongue too, hahaha, it still is a high truck though.
TopicToaster
ChatterBox
agreed, it does sound high. 2.250m high would be approx 88.58 inches/12ft4 inches. so i spose it means you got a 9 & 3/4 inch lift, man thats good height!!!!!!!!! any woman would be proud to have a hubby with that
2.25 meters = 7.38188976 feet have another beer mate
12.4 feet = 3.77952 meters
Wizard
03 Stock Springs, cargo drawer full of stuff, LR tank just under 1/2, airbags (8psi), new 238/85
2010
ForumSage
Sorry that was the roof bars on the canopy but it is the height to that point. That was with the 285/75 muds and lift. They claimed it is only a 2 inch lift but who knows?agreed, it does sound high. 2.250m high would be approx 88.58 inches/12ft4 inches. so i spose it means you got a 9 & 3/4 inch lift, man thats good height!!!!!!!!! any woman would be proud to have a hubby with that
I could go and measure it now if the boys hadn't killed the tape measure and they tyres wern't flat.
Master
If it's looking like a tight fit, also look at the entry angles, etc....Can anyone and everyone please supply me your overall height of your wagon and doublecab (cabin only I can mod tray headboards etc), please advise the tyre size and any suspension lift etc
I need to find out if it's going to fit in the property we might be moving into
My 1996 110 is just a scrape under 2m (stock everything, but slightly smaller than spec tyres), but it's whacked a 2.1 metre clearance bar because of where it was located on a ramp... Because of the squared off back end and overhang, it can kick up on entry....
Took me a few weeks of entering the work car park with sandbags in the back until they fixed that
ForumSage
OK mine is 206cm at the moment. Putting the new tyres on this weekend so it will gain a cm or 2.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks