Take the valve to the bearing shop and, if they're worth their salt, they should be able to size the appropriate 'O' ring/s.
Printable View
Take the valve to the bearing shop and, if they're worth their salt, they should be able to size the appropriate 'O' ring/s.
Further to what Xtreme said, I was talking to a bloke last week about o rings for mine. He said CBC bearings will have the o rings, even the blue fuel resistant one.
Don.
I'm looking for a 'generator' for a Colman 533 Sportster stove.
The Importer tells me the part is obsolete ? Coleman 533-5891
I've picked up a secondhand stove and there is a pricker that runs through the length of the generator tube, this has been broken so a new generator is required. Next stop....purchase from the US.
Article on replacement here Replace generator on Coleman dual fuel 533 stove. | The Mild Adventurer
There must be one in a Camping shop somewhere in Australia.....
Colin
got mine from USA ,in fact got two at the same ...
I'm also after a new generator my Coleman 533 but holy smokes, they are expensive - over $100 or more to get one from the US... doesn't really make it worthwhile to fix...
Does anyone know if u can you clean out or fix these Generators?
Sportster Stove 533 Parts
Approx $40 Aus from the UK plus postage.... if they'll post it to Aus.
what's the issue with your current generator? Is it clogged or is there a hole burned through? I wondered about the feasibility of cannibalising the fittings on the existing one and fitting them to a new length of brass tubing?
thanks for that.... but it says the catalog is suspended ( cannot see how to buy one either)Quote:
Originally Posted by Hoges
Mine works for a little bit then starts to lose the flame so I guess it could be blocked?
Have a look here.
Don.
Remove the jet and clean it.
Quote:
Originally Posted by Don 130
Thanks but that site doesn't sell parts but is good for the manuals though... From looking around his page it says he no longer sells parts