Results 1 to 5 of 5

Thread: alternator blues

  1. #1
    Join Date
    Feb 2009
    Posts
    143
    Total Downloaded
    0

    alternator blues

    today i lost electrical power and only just made it home on little electrical juice. I put about six months ago a denso alterantor into the rangie v8. Today when i got home i checked the voltage coming into the battery and it was like 8volts while vehicle running! The alternator was only about six months old and is a denso! have i fried the alternator?

  2. #2
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    Possible, but with an alternator that new, a wiring problem is more likely.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    bad earths
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  4. #4
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Check that the charge indicator on the dash is working, ie is on with the ignition switched on and off when engine is running. No light=no charge. If the light does not come on at all, either the globe may be faulty or its wire is fallen off its alt terminal .

    Check the big brown wire (battery feed) at the back of the alternator, if it's fried it won't work. Seen it often enough, caused by not tightening the connector nut. Cut the melted end off the cable and crimp a new end/repair piece on. It could damage the insulation inside the alternator around the connection post too.

    Is your tacho still reading? It relies on the alt to work.

    Best of luck.

  5. #5
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Check the big brown wire (battery feed) at the back of the alternator, if it's fried it won't work. Seen it often enough, caused by not tightening the connector nut.
    Been there done that!!!
    I soldered the lug onto the power wire of a ND that I bought in Saudi in 1985 or so and fitted to my 81 2 door.
    Was driving home to Riyadh one night with aircon on and all lights blazing when the volt meter dropped to 12volts.
    Turned out I had a dry joint and the heat melted the solder on the field windings which came loose and tore the guts out of the alternator. No red light as it was open circuit!!
    I crimp all wires now, as it was an expensive lesson.
    Regards Philip A

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!