thanks reads 90 , will let you know tomorrow, cheers![]()
G`day ,
if the fluid is brake fluid it will come off with the hose and plain water .
If the fluid is oil and on the inside of the rotor , it may be the paper gasket at the end of the axle housing .
For right pull look at left side and visa versa , it is generally one brake not working well and not one working too well .
It is possible to clean the oil out of the pads but it is best practice to replace both sets on the affected axle .
Peter
Gday folks, well it was the hub seal that was gone , the spring in the seal was completly broken! the seal was a bit pricey .........five bucks!!! cleaned the pads with brake cleaner and all good , thanks for the posts to all , put a couple of pics in the gallery of my rig, if you want to have a look, think i might look at doing the bushes in the front end? any thoughts from any who has had a go at it would be good , thanks again !![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks