Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Classic pulls to the right when braking

  1. #11
    Join Date
    May 2011
    Location
    melbourne
    Posts
    12
    Total Downloaded
    0
    thanks reads 90 , will let you know tomorrow, cheers

  2. #12
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by PhilipA View Post
    Could also be bad bushes in leading arm under the axle, or even bad panhard bushes but you would have other issues also.
    Regard sPhilip A
    Bad bushes pulls to the left. I've had that too.

  3. #13
    Join Date
    Jan 1970
    Location
    3960
    Posts
    1,161
    Total Downloaded
    0
    G`day ,

    if the fluid is brake fluid it will come off with the hose and plain water .

    If the fluid is oil and on the inside of the rotor , it may be the paper gasket at the end of the axle housing .

    For right pull look at left side and visa versa , it is generally one brake not working well and not one working too well .

    It is possible to clean the oil out of the pads but it is best practice to replace both sets on the affected axle .

    Peter

  4. #14
    Join Date
    May 2011
    Location
    melbourne
    Posts
    12
    Total Downloaded
    0
    Gday folks, well it was the hub seal that was gone , the spring in the seal was completly broken! the seal was a bit pricey .........five bucks!!! cleaned the pads with brake cleaner and all good , thanks for the posts to all , put a couple of pics in the gallery of my rig, if you want to have a look, think i might look at doing the bushes in the front end? any thoughts from any who has had a go at it would be good , thanks again !

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!