Results 1 to 4 of 4

Thread: Range Rover Classic Driver Seat

  1. 25th November 2011, 09:33 AM #1
    ads0r Guest

    Range Rover Classic Driver Seat

    Hey All,

    I was wondering if anyone could point me in the right direction in regards to aftermarket / swap out ( disco seat in rr etc ) / origional ( wrecker / dismantler ) Driver Seat for a 1975 Range Rover Classic 2 Door

    I got a bit carried away pulling the seat forward, and the plastic mount guide for the seat belt snapped in half or know where i could get a replecement guide/holder or complete seat

    cheers!
    Last edited by Scouse; 25th January 2012 at 02:13 PM. Reason: Wanted ad deleted from post.
    Reply With Quote Reply With Quote
  2. 25th November 2011, 08:32 PM #2
    Felix
    Felix is offline Master
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    240
    Total Downloaded
    0
    As I found out, early 4 doors have exactly the same seat including the flip forward mechanism as the 2 doors. The only difference being, is that the rod which attaches to the flip lever is shorter and does not protrude, thus not allowing you to use the flip function.

    If you head off to a wrecker and purchase a seat from an early 4 door (up to '85 i think?), pull off the seat back and punch out the rod. Take your seat and do the same- swap the rods, attach the lever and bobs your aunty!
    Reply With Quote Reply With Quote
  3. 26th November 2011, 09:51 PM #3
    ads0r Guest
    Quote Originally Posted by Felix View Post
    As I found out, early 4 doors have exactly the same seat including the flip forward mechanism as the 2 doors. The only difference being, is that the rod which attaches to the flip lever is shorter and does not protrude, thus not allowing you to use the flip function.

    If you head off to a wrecker and purchase a seat from an early 4 door (up to '85 i think?), pull off the seat back and punch out the rod. Take your seat and do the same- swap the rods, attach the lever and bobs your aunty!
    Sweeeeet

    Rego is due in Jan, so i have a little bit of time up my sleeve

    Thanks for the advice!
    Reply With Quote Reply With Quote
  4. 25th January 2012, 01:18 PM #4
    leyland
    leyland is offline Fossicker
    Join Date
    Jan 1970
    Location
    sydney west
    Posts
    72
    Total Downloaded
    0
    hi there ads0r, in regards to your front seat problem. i have a 1983 classic rangie 4 door my drivers seat base was completley stuffed the plastic guide you spaek of was broken of and belt used to get caught. i found a passenger seat of the same model as they are usually in better condition, and swapped it over to the drivers side just swap the seat belt brackets and remove pin so that you can tilt forward. i got the seat from pick and pull wreckers in blacktown for $100.hope this helps from leyland
    Reply With Quote Reply With Quote
« 89 classic air con | Soft Dash Classic »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!