Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: basic service questions - RRC 1994

  1. 2nd December 2011, 01:28 PM #1
    HangOver's Avatar
    HangOver
    HangOver is offline YarnMaster
    Join Date
    Jan 1970
    Location
    back in the suburbs, near joondalup
    Posts
    3,438
    Total Downloaded
    0

    basic service questions - RRC 1994

    Don't be too harsh, my other RRC is an 81' manual so .......

    1994 RRC

    1. Where exactly is the OBD plug?
    *OK I know it isn't OBD exactly but I'm sure i read somewhere you can get basic info with an OBD reader.

    2. Where is the filler, for the auto-transmission?
    Reply With Quote Reply With Quote
  2. 2nd December 2011, 09:04 PM #2
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    OBD 11 plugs were not required in Australia until AFAIK 2006, so they almost certainly do not have one.

    I would think you have a dipstick in the engine bay on the RH of the engine. If so that is the filler.
    If not then there is no filler other than a plug on the transmission.
    Regards Philip A
    Reply With Quote Reply With Quote
  3. 3rd December 2011, 12:13 AM #3
    HangOver's Avatar
    HangOver
    HangOver is offline YarnMaster
    Join Date
    Jan 1970
    Location
    back in the suburbs, near joondalup
    Posts
    3,438
    Total Downloaded
    0
    the dipstick is the filler, lol - saves $$ when building i suppose.
    the OBD thing must be a US thing then.

    thanks!

    nearly $400 on service parts today thats excluding labour
    Reply With Quote Reply With Quote
  4. 3rd December 2011, 09:36 AM #4
    superquag
    superquag is offline ForumSage
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Yep, filler-tube does double duty.... means decanting trans fluid into more manageable containers and a skinny funnel. - very slowly as you need to let the air out as you fill.......

    '95 Classic
    Reply With Quote Reply With Quote
  5. 4th December 2011, 05:25 AM #5
    51jay Guest
    I usually set up a syphon
    Reply With Quote Reply With Quote
  6. 16th December 2011, 11:14 AM #6
    HSE30's Avatar
    HSE30
    HSE30 is offline Fossicker
    Join Date
    Mar 2008
    Location
    far north QLD
    Posts
    79
    Total Downloaded
    0
    Quote Originally Posted by HangOver View Post
    Don't be too harsh, my other RRC is an 81' manual so .......

    1994 RRC

    1. Where exactly is the OBD plug?
    *OK I know it isn't OBD exactly but I'm sure i read somewhere you can get basic info with an OBD reader.

    2. Where is the filler, for the auto-transmission?
    In an RRC 94 the diagnostic connection is direct via correct cable to each ECU ie engine ems and abs ecu.
    Regards Russell.
    Reply With Quote Reply With Quote
  7. 16th December 2011, 11:08 PM #7
    superquag
    superquag is offline ForumSage
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Quote Originally Posted by HSE30 View Post
    In an RRC 94 the diagnostic connection is direct via correct cable to each ECU ie engine ems and abs ecu.
    Regards Russell.
    - Shall we tell him the prices for each piece of diagnostic equipment ?

    - And the cableS....

    Is there a RAVE manual for this model ? Or...
    Reply With Quote Reply With Quote
  8. 17th December 2011, 01:44 AM #8
    HangOver's Avatar
    HangOver
    HangOver is offline YarnMaster
    Join Date
    Jan 1970
    Location
    back in the suburbs, near joondalup
    Posts
    3,438
    Total Downloaded
    0
    go on then scare me
    Reply With Quote Reply With Quote
  9. 17th December 2011, 10:38 AM #9
    superquag
    superquag is offline ForumSage
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Quote Originally Posted by HangOver View Post
    go on then scare me
    Dunno...

    I was hoping some Wise One will appear and give us the info ! - I need to read/clear faults in my ABS & TC plus the SRS (airbags) - The TC warning lamp has burnt out, hopefully the other two will follow it...


    Start here:- Bearmach Omitec Hawkeye Diagnostic Tools at www.rimmerbros.co.uk

    Or here.... http://www.bearmach.com/downloads/Di..._v3and4_GB.pdf

    Either way, I don't see too much change from $1,000

    I've got the EAS Kicker to read, re-set and re-adjust my Air suspension, useful and great peace of mind.
    Reply With Quote Reply With Quote
  10. 20th December 2011, 07:45 PM #10
    milld's Avatar
    milld
    milld is offline Master
    Join Date
    Jun 2010
    Location
    Rockhampton, Queensland
    Posts
    414
    Total Downloaded
    0
    I cleared my ABS & TC light by the blink method. Just used a paper clip to short a couple of pin outs on the ABS plug from memory and the sequences blink on the dash to let you know what faults there are. Works on my 93
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Window ecu in a manual window car..... | dead spot off idle »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!