Results 1 to 5 of 5

Thread: red wire to battery in loom RRC

  1. #1
    Join Date
    May 2008
    Location
    Rockhampton
    Posts
    275
    Total Downloaded
    0

    red wire to battery in loom RRC

    Hi guys I have a thick red wire coming out of the RRC loom straight to the positive post of the main battery. its ~ 5mm wire (thicker then most others in the loom)

    I've looked in the wiring diagrams and there is only the wire going to the starter shown.

    When I remove it the car still runs and nothing obvious appears not to work so not sure what its for

    I bought a fuse block so considering running it through (max of 100Amps - entire block) but I'd like to know what its for first without hacking the loom to chase it, so I know 1 if its needed and 2 what is fuse to put it through.


  2. #2
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    AFAIK, none of those wires or fuses or relays are stock spec, so IMHO you are on your own.
    The only wires that look stock are the ones in the black tape under the smaller fuse block.
    The stock + from battery wires are usually light brown.
    Regards Philip A

  3. #3
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    I'd hazard a guess seeing what's around it, a power cable to the a/c compressor clutch relay on an aftermarket system? Just run a new wire, it's only a short length.

  4. #4
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,709
    Total Downloaded
    1.63 MB
    Don't cut the red wire!



    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  5. #5
    Join Date
    May 2008
    Location
    Rockhampton
    Posts
    275
    Total Downloaded
    0
    That pics just showing the new flash fuse block holder.
    the wire in question is not shown...my bad

    my only thinking that original is its runs straight into the loom and it appears to have the original tape on it. (it has been lengthen so it reaches the battery post) reason for this is unknown.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!