Printable View
Got this a few weeks ago, 1985 with only 160,000kms, no rust (for a Classic) but has had the original motor and Torqueflite replaced with a 1988 EFI motor with extractors, ZF 4 speed and LT230 with an Edelbrock 1404 carb and Edelbrock Performer manifold. I'm in the process of tidying it up and finishing a few things to get it to run.
https://www.aulro.com/afvb/images/im...013/12/459.jpg
https://www.aulro.com/afvb/images/im...013/12/460.jpg
ALL Range Rovers have rust in the upper tailgate frame....yours does not, therefore it cannot be a 'genuine' RR Classic as built by Poms in Solihull.
- It must be a Jap or Korean prototype knock-off....:p:p:p
1993 V8 with working EAS in the front, 1985 with 4BD1T behind it.
http://www.aulro.com/afvb/attachment...c-img_2011.jpg
Have posted this elswhere (on other forums) but thought may as well share here too! :D
Thanks to JohnR for getting these shots at our recent Coffs Harbour adventure.
Couple of changes to my vehicle, finally have a winch.
14inch 7100s all round. Still waiting on the ashcroft under drive and the superior engineering superflex arms.
Once that's all done it will be time to fit the supercharger and microsquirt!!!
https://www.aulro.com/afvb/images/im...014/02/135.jpg
https://www.aulro.com/afvb/images/im...014/02/136.jpg
https://www.aulro.com/afvb/images/im...014/02/137.jpg
Qick shot of my girl at ghm today
Cheers Al and Ipom for a great day you once again
:)
Grimace....awesome photos mate, particularly the first one, obviously a very capable vehicle.
What are the engine specs, & what sort of puffer are you going to fit?
Pickles.
Hey Grimace What does your rear suspension consist of? Are those treps 35 or 37?Quote:
Originally Posted by Grimace
Neale
here is mine i just picked up
quick run down
- lockers F&R
- 2 inch body and coil on konis and kings
- 33 all terrains (want to get 33 mudders if anyones up for a swap)
- air bag rears
- under body protection
- blah blah blah
https://www.aulro.com/afvb/images/im...14/01/1094.jpg
The rangie by dan keski, on Flickr
I hate this thradit makes me miss my LSE !
Kick arse Dan !!!
The engine is a mild 4.6Quote:
Originally Posted by Pickles2
The charger is a Vortech V2. I have had it for a few years but never got round to making the necessary changes to make it fit.
Hey Neale, the rear suspension is standard link geometry but I have got cranked rear arms and a ball joint spacer. The upper shock mounts are all custom and raised 75mm over standard. This was to assist in fitting the 14 inch travel Bilsteins.Quote:
Originally Posted by Corgie Carrier
With the soft spring rate I feel it is now at the limits of the rear ball joint.
The tyres are 37s sticky compound. I love them!!!