Project 89 Blown away

Printable View

Show 40 post(s) from this thread on one page

11th August 2009, 09:33 AM
mike 90 RR

Quote:

Originally Posted by Rangier Rover

The Rangie had a large branch fall on it and also got hailed on at

Fortunately the 90 has a straight turret the rest will buff out with a bit off effort.

My understanding is the roof panel just bolt off / on .. straight up?? (This is the Turret??)

I noticed the air compressors .... Do you have any quality paint spray guns??

Mike
11th August 2009, 09:43 AM
Rangier Rover

1 Attachment(s)

Quote:

Originally Posted by mike 90 RR

My understanding is the roof panel just bolt off / on .. straight up?? (This is the Turret??)

I noticed the air compressors .... Do you have any quality paint spray guns??

Mike

Yep and Yep:D I'm not a quality spraypainter though:angel:

My last effort still not finished:( May get back into this one next.
https://www.aulro.com/afvb/
11th August 2009, 09:59 AM
mike 90 RR

https://www.aulro.com/afvb/

:Thump:

You have tooooo many sheds, Tony
11th August 2009, 10:05 AM
Rangier Rover

Quote:

Originally Posted by Disco_owner

That's awesome Tony , Just what I hoped to see , a Rangie inside the workshop :D . you did a Great Job with the Toyotoa btw , I just sat in the workshop and watched you throwing spanners at it , your old man must be very pleased now that the 45 is running again and has power and A/C . must get hot in summer. recieved the Bag I left behind with all my welding gear in it , cheers . you're spot on with the rangie lockup converter not locking in 4th and has lots to complaint about under load :( oh well one of those things that needs attention soon.

Look forward to seeing lots more piccys of the 89 project . We'll definitely pull the 90 engine out next time I'm there and do the H/G on it and few other bits and get the Blower on and see how it goes, I think you need to do something about your Fuel Reg on the 90 if you're going to throw the Blower on :angel:the Injectors should have enough Flow.

Not to many bugs in the Toyota other than fuel control playing games :mad:
Swaped realys etc and found a dry joint at a plug in the end:)

I'll get the Rangie up on stands today and start undoing body mounts bar work etc and get this LRA lift happening:D

I wonder if a S/H converter may fix your auto for a wile? The trany feels OK to me:) Has no slippage other than torque converter.

I have a Malpassi variable fuel regulator with the blower. How are your alloy welding skills going? Want to have a crack at building an inter cooler to squeeze between the blower and intake. About 2.5" thick. Have to see if I can scrounge a air water set up off a truck dismantler and make it fit:twisted:
11th August 2009, 10:06 AM
Rangier Rover

Quote:

Originally Posted by mike 90 RR

http://www.aulro.com/afvb/attachment...1&d=1249951287

:Thump:

You have tooooo many sheds, Tony

:eek: I best not post the others up right:angel:
11th August 2009, 10:38 AM
Disco_owner

Quote:

Originally Posted by Rangier Rover

Not to many bugs in the Toyota other than fuel control playing games :mad:
Swaped realys etc and found a dry joint at a plug in the end:)

I'll get the Rangie up on stands today and start undoing body mounts bar work etc and get this LRA lift happening:D

I wonder if a S/H converter may fix your auto for a wile? The trany feels OK to me:) Has no slippage other than torque converter.

I have a Malpassi variable fuel regulator with the blower. How are your alloy welding skills going? Want to have a crack at building an inter cooler to squeeze between the blower and intake. About 2.5" thick. Have to see if I can scrounge a air water set up off a truck dismantler and make it fit:twisted:

okay i Guess , I can Weld it all up on the TIG machine at tafe , I don't have my own tig yet , just need to know the Dimensions etc , water to Air would be a great set up and more efficient , I like to see it setup on your Rangie 1st and I'll do the same on mine , you'll be able to run big boost , and then unleash the real power of the 3.9 V8.:twisted::twisted:

not sure about the reliability Factor thou:(
11th August 2009, 11:48 AM
Rangier Rover

Quote:

Originally Posted by Disco_owner

okay i Guess , I can Weld it all up on the TIG machine at tafe , I don't have my own tig yet , just need to know the Dimensions etc , water to Air would be a great set up and more efficient , I like to see it setup on your Rangie 1st and I'll do the same on mine , you'll be able to run big boost , and then unleash the real power of the 3.9 V8.:twisted::twisted:

not sure about the reliability Factor thou:(

Have a look at these:twisted:
Intercooler for 3800 Eaton M90 - Thrasher Engineered Performance

Ford Lightning Ported Eaton Stock Blower Next To The Ported Unit Photo
11th August 2009, 09:41 PM
Disco_owner

Quote:

Originally Posted by Rangier Rover

Have a look at these:twisted:
Intercooler for 3800 Eaton M90 - Thrasher Engineered Performance

Ford Lightning Ported Eaton Stock Blower Next To The Ported Unit Photo

have you seen the price of The GM3800 E90 interooler , Bit Exxy , I reckon

Direct from THRASHER ___Only $2422.14:eek:

I'd try and keep boost around 5-6 psi just to increase the V/E see how I go , I want to to keep it as reliable as possible.:) there is no other way to charge cool the air is there ? This will replace my intake Manifold , I justspent a fortune getting all ports opened up :D

https://www.aulro.com/afvb/images/im...09/08/1158.jpg
11th August 2009, 11:00 PM
Rangier Rover

Quote:

Originally Posted by Disco_owner

have you seen the price of The GM3800 E90 interooler , Bit Exxy , I reckon

Direct from THRASHER ___Only $2422.14:eek:

I'd try and keep boost around 5-6 psi just to increase the V/E see how I go , I want to to keep it as reliable as possible.:) there is no other way to charge cool the air is there ? This will replace my intake Manifold , I justspent a fortune getting all ports opened up :D

https://www.aulro.com/afvb/images/im...09/08/1158.jpg

We are looking at the bit on top of the manifold.... Once the blower goes on the ram tubes all come out and this is where they need help.
Don't see why cant we build one. Not the same as Thrasher for various reasons.
You know me..... Never say never:D I'm going to find a way of doing this with some engineering and improvisation.... This is what I seem to do these days:angel: I need access to a good accurate milling machine:angel:
16th October 2009, 09:39 PM
Rangier Rover

Just another up date.

Still nothing:mad:

Back in drought here again and privately educating my kids as well:eek:

Even though not much needs to be spent here the lack of "my" time seems to be the hold up with this one:(

Overhaulin...... where are you;)

Should I give up and sell it all on:(

Tony:(

Show 40 post(s) from this thread on one page