Project 89 Blown away

OK, Have the Haltech, Dizzy and a Loom. The loom is junk so will have to find anothery:(
For S/h ATV diff they wanted $500:eek: so told them what to do with it. Got all new parts to repair this one for $210. Have to make a tool to get pinion out will be worst part.:mad:
Have kit for Loader engine.:)
ATV Diff Parts
http://www.aulro.com/afvb/attachment...1&d=1213102999
Look at this stupid thing I've got to get out:eek:
http://www.aulro.com/afvb/attachment...1&d=1213103023
Making bodgy tool no 1006:o
http://www.aulro.com/afvb/attachment...1&d=1213103071
Almost there...
http://www.aulro.com/afvb/attachment...1&d=1213103147

The Haltech,Dizzy and a poor loom.
http://www.aulro.com/afvb/attachment...1&d=1213103169


Yea I know, Still using this site for images:angel:

Not much report as getting way off track or thread. May be Should call it 'Adventures of Rangiers work shop';)
I'm sending the crap loom back after numerous phone calls:mad:
Now have to find a HSV VN (V8) loom as need knock sensor.
Taking the H66 gas tanks ts sydney today to get test done:eek:


Other wise back off track. Got bodgy tool no 1006 made worked a treat.:)
http://www.aulro.com/afvb/attachment...1&d=1213231815

Feed mixer back in use
http://www.aulro.com/afvb/attachment...1&d=1213231861


A few more have come up:eek:

H20 pump on S11A/ Cooked Engine S111 (Might try to find a Defa TDI 200 for it)/ Spat CV on another ATV/ Loader engine to reasemble.

Cheers Tony.

Have got H66 tanks away to be tested wile in Sydney.
http://www.aulro.com/afvb/attachment...1&d=1213622476

Here is my mates fan force pizza oven;)
http://www.aulro.com/afvb/attachment...1&d=1213622504

Saw the thread on the drinking topic. :oThere was only four of us and we demolished 2 x750ml wine, 1x 750ml baileys, 1 bottle of snaps and 30 beers:eek::eek:.
If a few beers is a drinking binge we look real bad:D:D:D.
The trip home was not good as found a young couple had a roo strike in a Hilux. It pushed rad onto fan etc. Had to tow them to safety As they had no road cover or mobile phone.:mad: So was bloody late home.
Unless some progress happens on the Rangie soon I will burry this thread for a wile. I've got to get on top of all the other stuff 1st:(

It will be interesting to hear how much testing the two H66 tanks will be. I got the same ones in mine, and it cost $375 ea to get them testes :eek: Luckily I did the removal/install myself, and with the final $186 on a certificate for rego it was almost $1000... would have been cheaper to install a new system into another car!

Quote:

---

Originally Posted by stooge

It will be interesting to hear how much testing the two H66 tanks will be. I got the same ones in mine, and it cost $375 ea to get them testes :eek: Luckily I did the removal/install myself, and with the final $186 on a certificate for rego it was almost $1000... would have been cheaper to install a new system into another car!

---

Hows your sphincter:eek::eek::eek:

Should be less than $300 for the 2

APA brand tanks should be $120 each, got one done 2 months ago

No news on H66 tanks yet:(. Will phone them this wk.:mad: Have found a good VN Loom complete with all sensors etc:)

OK, we had some fun with tanks as had no compliance plate:eek:. We have sorted it out but the damage was $440: for the 2:( Could have been worse;)

Quote:

---

Originally Posted by Rangier Rover

OK, we had some fun with tanks as had no compliance plate:eek:. We have sorted it out but the damage was $440: for the 2:( Could have been worse;)

---

Sorry about the no plates:(, I never relised as I just fitted it, to much trouble to get anyone to compliance custon stuff here:mad:

Quote:

---

Originally Posted by rovercare

Sorry about the no plates:(, I never relised as I just fitted it, to much trouble to get anyone to compliance custon stuff here:mad:

---

No worries:) They were 2nd hand goods;) The tanks were still in good nick with no rust. so did not have to stick a camera in side. Just put a band around and lots of psi:o. Now I've just got to convince them that gas is safe with the blower with carb set up:eek: They wan't gas injection. I'd say it would not help with a backfire anyway. I've heard if it happens the belt slips or can pop manifold gasket. They recon it will blow the supercharger off:eek: What a load of rot. None of the fitters here have ever done one so they don't know.:mad: