Thread: Sping height (RRC) I need a favour!

I would like a few different measurements from some of the 3 and 4" lifted rangie classics to get an idea of where my springs are currently sitting in an average scheme of lift kits.

I always thought my rangie was way over 4" lift and too high, but after looking at it today I think it's settled down quiet well.

Just so everyone gets the same measurement, I am measuring compressed spring lengths (at standard ride hieght), from top to bottom of springs only (include lengths of spacers if used).

My front measures in at about 330mm and the rear at approx 415mm

It sits arse up but is completely empty right now. Keen to see what others measurements are.

Cheers
Grimace

Originally Posted by Bush65

I have Landcruiser springs in my disco I, which are supposed to be about 3" lift. To fit these the bottom spring seat is flipped over.

If the seat was in the normal position and for the same lift, the ride height of the front spring would be approx 330 mm and the rear 360 mm.

Interesting. Thank you.