It was probably the clump of hair on the end of the pin that stopped it going in!Quote:
Originally Posted by rathgar
Printable View
It was probably the clump of hair on the end of the pin that stopped it going in!Quote:
Originally Posted by rathgar
BadCo, it looks like your d/side radiator mount is bent upwards, That is possibly what is fouling the bonnet.
That radiator mount won't sit right on the radiator, the fan shroud is hitting the bonnet.Quote:
Originally Posted by Bearman
I'll have a proper look once the rain stops, potentially I have done something wrong somewhere after receiving my concussion!
Hi Bad Co hope these photos help, Have uploaded the maximum of 5 files for this post will up load the rest in the next post Brad.
Cheers mate, appreciate your time. I'll look at them on the computer when I get home and compare them.Quote:
Originally Posted by brad56
other photos Brad.
Hi All if your PSA feels gritty whilst rotating the input shaft this is the most probable cause there are other pits in the bearing seating area on the opposite side of the shaft which cant be seen
Brad
Thanks again for the photos.Quote:
Originally Posted by brad56
Quick question, where did you get that bracket for the PAS reservoir?
I was outside tinkering again, trying to see if I had made a mistake somewhere. But it's straight forward, not many places to go wrong.Quote:
Originally Posted by brad56
As you can see from the photo, mine doesn't sir anything like brads.
http://www.aulro.com/afvb/attachment...1&d=1424591171
Just a thought, did you put the plastic cowl on upside down??