Thread: PAS Install

BadCo, it looks like your d/side radiator mount is bent upwards, That is possibly what is fouling the bonnet.

Originally Posted by Bearman

BadCo, it looks like your d/side radiator mount is bent upwards, That is possibly what is fouling the bonnet.

That radiator mount won't sit right on the radiator, the fan shroud is hitting the bonnet.

I'll have a proper look once the rain stops, potentially I have done something wrong somewhere after receiving my concussion!

Hi Bad Co hope these photos help, Have uploaded the maximum of 5 files for this post will up load the rest in the next post Brad.

Originally Posted by brad56

Hi Bad Co hope these photos help, Have uploaded the maximum of 5 files for this post will up load the rest in the next post Brad.

Cheers mate, appreciate your time. I'll look at them on the computer when I get home and compare them.

other photos Brad.

Hi All if your PSA feels gritty whilst rotating the input shaft this is the most probable cause there are other pits in the bearing seating area on the opposite side of the shaft which cant be seen
Brad

Originally Posted by brad56

other photos Brad.

Thanks again for the photos.

Quick question, where did you get that bracket for the PAS reservoir?

Originally Posted by brad56

other photos Brad.

I was outside tinkering again, trying to see if I had made a mistake somewhere. But it's straight forward, not many places to go wrong.

As you can see from the photo, mine doesn't sir anything like brads.