What the hell? Spigot bush is also too big.
http://www.aulro.com/afvb/attachment...1&d=1451616428
Printable View
What the hell? Spigot bush is also too big.
http://www.aulro.com/afvb/attachment...1&d=1451616428
It's not that it's no good but the later type like what is already in yours are a better seal. The original one like you have just bought are prone to leaking prematurely. And the clutch throwout bearing on the left is the correct one, the one on the right is for a V8 gearbox. It won't work in the Isuzu bellhousing.
Damn it, i guess the spigot bush is wrong too.
I specifically got the 4bd1t with 4 speed box clutch kit.
Sent from my Nexus 4 using AULRO mobile app
BrianQuote:
Originally Posted by Bearman
Can the steel sleeve on the left hand bush be fitted to the v8 bush?
Looking at it, it looks like it can be done. How ever I need to do this all over again to fix the bits in the gearbox so I'll get in contact with ACS and get them to send me the right parts.Quote:
Originally Posted by rar110
Yes, easy enough to do with a press. Just have to be careful not to destroy the plastic bit and Loctite it together when you reassemble it.Quote:
Originally Posted by rar110
On closer inspection I saw that the currently installed seal is the BYG one, good spotting Bearman and thanks for your help.Quote:
Originally Posted by Bearman
The gearbox is back in and tomorrow I have the cross member and propshafts and a few small things to do before turning up the boost and fuel and heading to Woodhill on Sunday.
Small up date, the clutch works well, no slippage. Exhaust is done, yay and I have adjusted the MBC so I can get 12 psi, EGTs are a little high now so I'll add a bit more fuel and see how we go.
On a side note, does anyone know anything about the pedal stop screw? Someone was saying he wound his out three full turns. Thoughts?
https://www.aulro.com/afvb/images/im...016/01/677.jpg
Currently I have 14mm of exposed thread.
Badco
That's your fuel screw
How is your performance?
Better, great or huge!!
Hey Phil, that's the top of the fuel pump. The top screw is the throttle stop and the bottom one is the idle screw.Quote:
Originally Posted by Phil B
Performance off road in low range is amazing. On road high range is definitely an improvement but it feels like it lacks top end.
It's still hitting 600c too easily though and the engine bay, especially the intake manifold, get very warm.
Sent from my Nexus 4 using AULRO mobile app