Thread: DISCO SECURITY CODE

I have changed th battery in my TD5 and radio not working and have no radio handbook but have been told how to do it but doesn't work a '2' is flashing on screen.
my code is 7146
so I press button 1 - 7x
then 2 - 1x
then 3 - 4x
then 4 - 6x
then pressed 5
is this the correct procedure or do i need to press something else

When I have pressed button one 7x the radio works but displays flashes and
cuts out and goes back to a '2' on the screen
HELP
Thks Bob

OK

I am guessing you have the Head Unit that is the basic CD player?

OK directly from manual:

If power to the audio unit has been interrupted (Vehicle battery disconnected, for example), the code must be re-entered before the set will operate. Enter the code as follows:

1. Switch on the set 'CODE -- -- -- --' appears in the display
2. Press pre-set button 1 repeatedly until the correct digit of the code is shown.
3. Press the second pre-set button repeatedly to select the second digit of the code
4. Press pre-set 3 until the thrid digit of the code is shown in the display.
5. Press the fourth pre-set button to select the final digit of the code.
6. With the full code displayed, press the right hand Search control (arrowed in illustration) to enter the code. (I think this is where your going wrong)

After 12 attempts the radio will be locked beyond repair.