-
9th June 2008, 03:51 PM
#1
RRC Radio Wiring
Hi All,
I spent hours searching for this info & found it on another forum. Full credit to the gent whom posted it!! But thought it might be useful for others as well. 
Its the wiring layout for the stock radio connections & what each colour is for. I fitted a new head unit today in easy time thanks to this.
Cheers!!
"_____________________________
> white/black stripe, | white
> green/black stripe, | green
>
> purple, | red
>
> grey(on its own) -- (LOCK LUG SIDE)
>
> black, | orange
>
> yellow/black stripe, | yellow
>
> blue/back stripe, | blue
>______________________________
Using above format:
--------------------------
FRONT right | FRONT right
FRONT left | FRONT left
12V + | 12V + connected to ignition switch
auto antenna (I didn't use this)
EARTH | (don't know name but used on some car
phones to turn volume down when phone rings-not needed)
BACK right | BACK right
BACK left | BACK left
--------------------------
As a matter of convention the speaker wires that have the thin black
stripe are used to make sure all the speakers are connected to the
same polarity, and this way they are all in sync. On some speakers
(low end of market) it also shows the "earth" wire for the speaker.
The purple 12 volt wire is connected to a voltage source that is
always on, as this is what maintains the radios memory (radio station
settings and clock) and makes the LED on the front flash as a security
warning.
If you want the radio to work without having to have the ignition
switch on, then simply run the two wires together to your fused active
12 volt supply.
To make sure the radio is OK I connect the purple and black wire to
the 12 volt and earth respectively and make sure the LED comes on.
When the red wire is connected then the screen lights up etc and you
can put the security code etc in.
Don't run the radio without any speakers connected as you may wreck
the output circuit and this is expensive.
The antenna plugs into the socket at the rear right hand side.
Hope this helps.
Cheers
Phillip Simpson"
-
12th June 2011, 10:54 AM
#2
88 RRC speaker wire colors
I brought another 88 RRC a few weeks ago with no stereo, just a bunch of wires!
Anyhow after searching online and looking at wiring diagrams which still didn't reveal the speaker wire color codes, as they are all black with colored stripes, finally sorted it out.
FL / + black, red stripe / - black, pink stripe
FR / + black, brown stripe / - black, white stripe
RL / + black, yellow stripe / - black, orange stripe
RR / + black, blue stripe / - black, green stripe
hope it saves someone a headache like i had
-
12th June 2011, 07:53 PM
#3
Well done guys and thanks for posting, it will help out no end for everyone!
Cheers.......................Pete!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks