Results 1 to 3 of 3

Thread: RRC Radio Wiring

  1. #1
    Join Date
    Mar 2008
    Location
    Bayswater, Melbourne
    Posts
    782
    Total Downloaded
    0

    Lightbulb RRC Radio Wiring

    Hi All,

    I spent hours searching for this info & found it on another forum. Full credit to the gent whom posted it!! But thought it might be useful for others as well.

    Its the wiring layout for the stock radio connections & what each colour is for. I fitted a new head unit today in easy time thanks to this.

    Cheers!!

    "_____________________________
    > white/black stripe, | white

    > green/black stripe, | green
    >
    > purple, | red
    >
    > grey(on its own) -- (LOCK LUG SIDE)
    >
    > black, | orange
    >
    > yellow/black stripe, | yellow
    >
    > blue/back stripe, | blue
    >______________________________


    Using above format:

    --------------------------
    FRONT right | FRONT right

    FRONT left | FRONT left

    12V + | 12V + connected to ignition switch

    auto antenna (I didn't use this)

    EARTH | (don't know name but used on some car
    phones to turn volume down when phone rings-not needed)

    BACK right | BACK right

    BACK left | BACK left
    --------------------------
    As a matter of convention the speaker wires that have the thin black
    stripe are used to make sure all the speakers are connected to the
    same polarity, and this way they are all in sync. On some speakers
    (low end of market) it also shows the "earth" wire for the speaker.

    The purple 12 volt wire is connected to a voltage source that is
    always on, as this is what maintains the radios memory (radio station
    settings and clock) and makes the LED on the front flash as a security
    warning.

    If you want the radio to work without having to have the ignition
    switch on, then simply run the two wires together to your fused active
    12 volt supply.

    To make sure the radio is OK I connect the purple and black wire to
    the 12 volt and earth respectively and make sure the LED comes on.
    When the red wire is connected then the screen lights up etc and you
    can put the security code etc in.

    Don't run the radio without any speakers connected as you may wreck
    the output circuit and this is expensive.

    The antenna plugs into the socket at the rear right hand side.
    Hope this helps.

    Cheers
    Phillip Simpson"

  2. #2
    Join Date
    Sep 2009
    Location
    Central Vic
    Posts
    683
    Total Downloaded
    0

    88 RRC speaker wire colors

    I brought another 88 RRC a few weeks ago with no stereo, just a bunch of wires!

    Anyhow after searching online and looking at wiring diagrams which still didn't reveal the speaker wire color codes, as they are all black with colored stripes, finally sorted it out.

    FL / + black, red stripe / - black, pink stripe

    FR / + black, brown stripe / - black, white stripe

    RL / + black, yellow stripe / - black, orange stripe

    RR / + black, blue stripe / - black, green stripe

    hope it saves someone a headache like i had

  3. #3
    RufRangie Guest
    Well done guys and thanks for posting, it will help out no end for everyone!

    Cheers.......................Pete!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!