Thread: Nanocom and Window's 7

Ean,

Firmware Version 2.05.

I can email to you if you want.

You will need to unzip the file you downloaded from Nanocom before you can use it. I can also email 7zip (Freeware) to you if you would like.

Dave.

Ean,

I also the full installation disk that covers Version 2.05. I could burn a copy and post to you.

If you can burn a CD I can email the file too you. Its a large file, but it would work.

PM your details if I can help.

Dave.

Originally Posted by DavidB

Ean,

Firmware Version 2.05.

I can email to you if you want.

You will need to unzip the file you downloaded from Nanocom before you can use it. I can also email 7zip (Freeware) to you if you would like.

Dave.

Thanks Dave,
how do you unzip a file ( Leaving myself open to some flack here) My 15 y/o just reckons im a dinosaur so I will never understand.
Im sure its something simple but is it simple to explain..

Cheers Ean

Ean,

Firstly you only unzip zip files. These are a single file or several files that have been compressed (zipped) to make a smaller file.

You need software to unzip files. As mentioned previously I can email you 7zip.
You install this in your computer and you can then unzip any zip file.

After you install 7zip, find the zip file you want to unzip, right-click it and 7zip will give you the option to "extract here". This will extract the contents of the zip file. You are then able to use the unzipped files as you would any other file on your computer.

Dave

Gday Dave,
Got yopur disc today, and followed your instructions ( the disc is the exact same as mine ) and I still cannot load the drivers.

When I go into Device manager I dont have the Icon.Ports(com and LPT)
I have the heading Other Devices..Nanaocom diagnostic tool..

The other thing I cant do is download the software upgrade cause it requires the com port # between nanocom and the Laptop.

Think I will just have to find why the driver wont load onto my laptop..

Thanks

Cheers Ean

Send Mattia at Nanocom an email info@nanocom.it and I'm sure he can sort it out. I contacted Mattia recently re features of the new Nanocom & compatibility with D3 & he replied the next day.
You could try going to Computer> Add Remove programs & removing Nanocom entirely. Then try installing in XP Compatibility mode. I haven't tried it but I think it is simply a matter of highlighting the .exe file, right clicking on it & selecting Install in XP Compatibility mode. Another option is to right click the .exe (install ) file & Run as Administrator. I've found that this is the only way to get some programs to install correctly.
Cheers..b

Hi Ean,

you might try to login as real Administrator (have to enable it and set a password first in Computer Management -> Users), and also sometimes helps to connect your laptop to the internet while installing new hardware.

Cheers,
Ruslan

P.S. I've installed my Nanocom under Administrator account, Win7x86

Ean,

Check out attached file.

This will explain how to install driver. Checked this out on my laptop before answering.
Any futher questions, just ask.

Dave.