How big a tyre can I fit on a 2"suspension lift Disco without srubbing?

**pistolpete** · 3rd July 2010, 01:31 PM

Originally Posted by Brettsky64

Excuse my ignorance but what is a camal cut?

http://www.aulro.com/afvb/attachment...-sv403474a.jpg

measure in 6cm from bottom rear of wheel arch... then draw a line from that point to make the arch look like the above link.. and cut.. tin snips or an angle grinder is the way to go...

i'm yet to do it.. but i'm also yet to get my suspension and tyres

**HBWC** · 4th July 2010, 01:22 AM

Originally Posted by 953

I ran 265/75 on my last D1, the front would rub at high speed if the camber of the road fell away sharply. On my current D1 I have 31x10.5 which also do the same, Iwas looking at fitting 265/75 again, but dont want to fork out & then tear lugs off new tyres. Anyone else have this prob?
Cheers Dean.

?? what offset mate i'm running 31/11.5/15 on a 8 inch rim with a neg 25 offset on standard suspension and they only just rub at full compression on the front the rear on the other hand rub bad under the door but a 3/4 inch bump stop extension would stop this

frankenstain · 5th July 2010, 10:57 AM

Check this out.

[ame=http://landroverforums.com/forum/showthread.php't=31695]Pimpin' my ride - Land Rover Forums - Land Rover Enthusiast Forum[/ame]

discojim · 7th July 2010, 04:10 PM

Originally Posted by 953

I ran 265/75 on my last D1, the front would rub at high speed if the camber of the road fell away sharply. On my current D1 I have 31x10.5 which also do the same, Iwas looking at fitting 265/75 again, but dont want to fork out & then tear lugs off new tyres. Anyone else have this prob?
Cheers Dean.

I am running Cooper S/T and i have not ripped a lug off yet! As for the front, wind out the steering stops (at full lock) and you may not have a problem. If you run simex or rather aggresive tyres you might have dramas on standard steeles! As for high speed i have not had any dramas.

**953** · 7th July 2010, 07:37 PM

Originally Posted by discojim

I am running Cooper S/T and i have not ripped a lug off yet! As for the front, wind out the steering stops (at full lock) and you may not have a problem. If you run simex or rather aggresive tyres you might have dramas on standard steeles! As for high speed i have not had any dramas.

Thanks Discojim, but the rubbing is not coming from the radius arms, its higher up in the guard. Possibly stiffer springs or extended bump stops may do the trick.
HBWC, THE 265/75 were on standard D1 rims, the 31x10.5x15 are on Sunny/ Dynamic? style rims, not sure of the offset.
Cheers Dean.

Thread: How big a tyre can I fit on a 2"suspension lift Disco without srubbing?

Thread Tools

Bookmarks

Bookmarks

Posting Permissions