Results 1 to 8 of 8

Thread: Roof Spotlights in QLD

  1. #1
    Join Date
    Jul 2009
    Location
    Brisbane
    Posts
    68
    Total Downloaded
    0

    Roof Spotlights in QLD

    Can anyone tell me what is the law regarding roof mounted spots in Qld? Can I keep covers off?

    Does the law state how they need to be wired i.e do they need to be independently wired from my headlights etc?

    I know this has been talked about a lot but I keep finding conflicting advice.

    P.S I can see why the matt black bonnet is a good idea, especially with my white rig. It’s pretty blinding. Think I may opt for a vinyl sheet solution. Can’t bring myself to paint her.

  2. #2
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,904
    Total Downloaded
    0
    Hi digahole, they are legal in Queensland and are required to be wired up the same way as the normal driving lights have to be wired up.

    I have a PDF copy the QLD Road Rule that specifically covers roof mounted lights some where and I’ll post it up if I can find it, but it has been legal here for a few years now, and I believe it’s legal in most if not all states now.

    By the way, if you are are using a gutter mount roof rack to mount your driving lights, simply slide the roof rake back far enough so that the driving lights don’t shine on the bonnet.


    A word of caution, if you slide the rack back, make sure your lights don’t then shine on your rear vision mirrors.

  3. #3
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Quote Originally Posted by digahole78 View Post
    Can anyone tell me what is the law regarding roof mounted spots in Qld? Can I keep covers off?

    Does the law state how they need to be wired i.e do they need to be independently wired from my headlights etc?

    I know this has been talked about a lot but I keep finding conflicting advice.

    P.S I can see why the matt black bonnet is a good idea, especially with my white rig. It’s pretty blinding. Think I may opt for a vinyl sheet solution. Can’t bring myself to paint her.
    I attempted to get a definitive ruling on this from Qld. Transport. I was to write a small article for a club newsletter. Four different officers gave four different answers. I gave up.

    I did think of writing to the Minister's office asking for a definitive ruling but could not be bothered.
    URSUSMAJOR

  4. #4
    Join Date
    Aug 2007
    Location
    Sydney
    Posts
    516
    Total Downloaded
    0

  5. #5
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    A version of the previous model Jeep Cherokee had them as standard from the factory so they must be legal as a concept in all states.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  6. #6
    Join Date
    Jan 2007
    Location
    Warragul, Victoria
    Posts
    1,989
    Total Downloaded
    0
    Quote Originally Posted by Boxer View Post

    I'm not quite sure how they got by ADR's, if indeed they did.
    If they are classed as one light per light bar they are contrary to the reg that says that lights have to be mounted in asymmetrical pairs. If they are classed as multiple lights per bar you can have a maximum of 4 extra high beam lights so the 50 inch bar with its huge array of LED wouldn't comply either.
    http://www.frli.gov.au/ComLaw/Legislation/LegislativeInstrument1.nsf/0/8DDC880BC87F7548CA2570D6000354C1/$file/ADR+19-02+%5BFINAL+FRLI%5D+9-12.pdf

  7. #7
    Join Date
    Nov 2007
    Location
    Gold coast
    Posts
    3,130
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    A version of the previous model Jeep Cherokee had them as standard from the factory so they must be legal as a concept in all states.

    Garry
    As did the Nissan X trail, T30....

  8. #8
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Today I spoke to Modifications Branch of Qld. Transport. Although these lights are not specifically mentioned in either the legislation or the Transport Operations Road User Manual, it appears they are now permitted. Must be mounted symetrically in pairs; centres no closer than 600mm; not to exceed the vehicular maximum height of 4.3 metres; wired and switched through the high beam circuit with a master switch in the circuit as well. Usage in accordance with the regulations pertaining to high beam headlights, not to be used within 200 metres of another vehicle, not to be used when stationary, not to interfere with the safe operation of any other vehicle, not to dazzle or annoy the driver of any other vehicle.

    The requirement of minimum 600mm centres and symmetric pairs means that most vehicles other than heavy trucks would be restricted to two overhead lamps there not being room for more without overhanging the side of the roof.
    URSUSMAJOR

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!