Thread: water leak

Check underneath the washer bottle, you'll see where a large wiring harness that has a rubber boot on it as it enters the firewall. it has been known for water to leak through there , also check the drives side under the brake booster. use some silicone to seal it. Another spot is through the air vent air intake in the tray under the the hood( bonnet), if water builds up in that tray it can rise and enter the intake, make sure the tray drain holes aren't blocked. Also check the caulking at both sides of the top corners of the bulkhead where it meets the side panels. the welds can crack the sealer and water can ingress there, also have a look underneath in the wheel arches and see if any holes have lost their plugs

thanks for the advice wizard i will try all of those . I am glade i joined this sight its good to have some one thats allready been down that path

http://homepage.virgin.net/mark.hopkins2/LRWI1.jpg

Try this page it may help!

Cheers

Doug