Results 1 to 8 of 8

Thread: yes another abs issue

  1. #1
    Join Date
    Sep 2008
    Location
    brisbane
    Posts
    180
    Total Downloaded
    0

    yes another abs issue

    i have a abs fault, but have searched and searched on here and on my 94 es v8 and cant for the life of me find the conector to bridge so i can extract the abs fault codes.


    does any 1 have some pics or any info to help me out/what does it look like?

    i know the procedure but cant find it under the dash anywhere.
    kind regards

  2. #2
    mike 90 RR Guest
    Glen

    RAVE describes it as

    Located behind the dash
    RHS of the steering column (RHD cars)
    Blue 5 pin multi plug


    Cheers
    Mike

  3. #3
    Join Date
    Feb 2008
    Location
    Ferntree Gully, Vic
    Posts
    1,814
    Total Downloaded
    0
    I dont think the 94 model had the connector for it.I think it was from 96 onwards.I know my 95 ES doesnt have one.

  4. #4
    mike 90 RR Guest
    Quote Originally Posted by SPROVER View Post
    I dont think the 94 model had the connector for it.I think it was from 96 onwards.I know my 95 ES doesnt have one.
    Blast .... I read it from the RAVE for 1995


    So until someone else can confirm it ....

    Discos have a lot in common with RR's for parts and locations .... so .....

    My RRC manual (up to 1994) says that the ABS Test plug is located under the drivers seat / along with the ABS fuses & relays ... So have a peek under there .... You take off the side plastic cover of the seat base to reveal it

    Should be beside the 14CUX ECU



    Cheers
    Mike

  5. #5
    Join Date
    Sep 2008
    Location
    brisbane
    Posts
    180
    Total Downloaded
    0
    I've found the plug did the test got error 2-8. But won't let me clear it now what
    ??

  6. #6
    mike 90 RR Guest
    Quote Originally Posted by glenn82 View Post
    I've found the plug did the test got error 2-8. But won't let me clear it now what
    ??
    Where did you find the plug??



    my manual is at home & I'm at work

    Will look it up for you .... ... unless some one else can chip in .....


    Cheers
    Mike

  7. #7
    Join Date
    Sep 2008
    Location
    brisbane
    Posts
    180
    Total Downloaded
    0
    i found the blue plug on the steer coloum, did the test after pulling abs relay.
    followed the steps a few times to clear it and see other error codes but it wont clear.

    cheers

    glenn

  8. #8
    mike 90 RR Guest
    Quote Originally Posted by glenn82 View Post
    I've found the plug did the test got error 2-8. But won't let me clear it now what
    ??

    ....I didn't find the answer on RAVE ... But after a bit of googeling .... I came up with this

    ..... ABS codes ....

    Cheers
    Mike

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!