Results 1 to 4 of 4

Thread: Gearbox Has Moved??

  1. 13th July 2012, 09:24 AM #1
    Distokes Guest

    Gearbox Has Moved??

    Hi,

    I recently went to the barrington tops, i drove over a log and well bellied out but not enough to damage the sills, after i got over and back onto the road i kep missing 3rd gear and hitting first. The leavers resting position has now changed and is hard up against the left side which is in line with 1st and 2nd gear, all gears are operating normally with no crunching or grinding. I have inspected the mounts but seem to be ok.

    Any other suggestions would be great!

    Its a Disco 1 97 manual TDi

    Cheers Ben
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 13th July 2012, 10:01 AM #2
    MacMan's Avatar
    MacMan
    MacMan is offline Wizard
    Join Date
    Jan 1970
    Location
    Forty minutes closer to the hills in a house the bank is kind enough to let me live in
    Posts
    1,532
    Total Downloaded
    0
    It's nothing dramatic and can be rectified with the box in place, but you have a broken bias plate. This is the component which centres the stick on 3/4, and has the bias springs either side.

    See here: R380 Gearchange - broken plate! - Land Rover Zone



    Removal of the centre console and rubber cover will reveal all. Easy to replace or weld.
    Reply With Quote Reply With Quote
  3. 13th July 2012, 10:52 AM #3
    Distokes Guest
    Thanks very much
    Reply With Quote Reply With Quote
  4. 13th July 2012, 11:49 AM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,501
    Total Downloaded
    0
    you're only in trouble if both levers move to the same side at the same time..

    that means youve totaled the gearbox mounts.

    you'll definately know that when it happens.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« rear tail shaft | D1 300TDi Uni joints front propshaft »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!