Brake vacuum pump questions

Quote:

Originally Posted by gazby

As I am now old and no longer flexible I was unable to wriggle in there and drill the rivets with pump fitted to engine,

Join the club! :wheelchair:

Quote:

I found it difficult just to swing the spanner in order to refit the pump and tighten the six bolts.

I had the benefit of having a motor on the work bench to find the best combination of sockets and extensions to use. :cool:

The gasket between the pump and the block should be the thick one to stop the plunger bottoming out inside the end plate of the vacuum pump, or use two thin ones.
.