- 
	
		
                        
                                
                                        
                                                30th October 2012, 01:42 PM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
		
			Go pedal travel
		
		
				
					
					
				
				
		
			
				
					Hi all,
Have been driving my partners 300tdi auto for the past week as my 200 tdi man hasnt had 2nd or 4th gear(@ mechanics now getting fixed 
).
My question is: Did the 300tdi auto always have a short amount of travel in the accelerator pedal compared to the 200tdi ?  It seems to me to be about half of what the 200tdi is.
If its supposed to be the same amount of travel,how do I go about getting the remaining amount of travel back.
Is it because its an auto or is it the same in a manual as well.
Thanks
				
			 
			
		 
			
				
			
				
			
			
				
2014 Freelander SE TD4
2003 Range Rover TD6
92 disco tdi manual  sold
95 disco tdi auto gone
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                30th October 2012, 02:44 PM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Half pedal is all it needs to drag of the pootrols and snoozers in their cruisers 
Sorry, couldn't resist 
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                30th October 2012, 03:07 PM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
					
				
		
			
				
					To start with, see if there is any slack in the cable (pedal not depressed). 
From memory there is a black plastic adjuster that can be turned to remove the slack.
Next, while holding the accelerator pedal all the way down, see if you can move the lever/quadrant on the top of the injector pump any further.
If you can then you're not getting full travel from the pedal. Check that the pedal is actually going all the way down to the stop and not hitting on a floor mat etc.
Steve
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
		
		
		
	
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				
				Posting Permissions
			
			
				
	
		- You may not post new threads
 
		- You may not post replies
 
		- You may not post attachments
 
		- You may not edit your posts
 
		-  
 
	
	
	Forum Rules
 
			 
		 
	 
 
  
    Search AULRO.com ONLY! 
 | 
    Search All the Web! 
 | 
  
  
  
  
Bookmarks