mines no good, its got a nasty looking split in it where its supposed to be pressed together.
for a short term fix you can use a 1/4 inch t Piece and some hose clamps.
Printable View
mines no good, its got a nasty looking split in it where its supposed to be pressed together.
for a short term fix you can use a 1/4 inch t Piece and some hose clamps.
Good going Macca.
Good working stuff out.
MG
Quote:
Originally Posted by Blknight.aus
I used a brass 3way seems to work ok. If the crapy plastic one better?
Its a jet pump for removing air from the radiator. Basically it auto bleeds your entire cooling system all the time while you drive. A tee piece won't have the same effect but you can manually fill the rad via the filling bung. Anyways its a 5/16 brass tee you need to use not a 1/4. Or just buy a new plastic thingy, I believe they aren't that dear, complete with the three hoses.Quote:
Originally Posted by 460cixy
So realy once its primed and all the air is out it should be fine to have the brass fitting? Once its filled and running I loosen the bung on the tstat housing and the air normally passes out there
ESR2348 pump expansion tank ejector.This is for the 300tdi.Hope that helps[bigwhistle]