Thread: wheel turn stops

Originally Posted by Judo

What rims are you using and what is their offset?

Was the vehicle modified much when you got it? Maybe the bolts were changed for some reason by the previous owner? (Can't see why, but just a thought).

I also have 245-75's and I made a very small adjustment when they were fitted, but no issues like you're facing. Something is not right....

standard d1 rims. so standard offset. vehicle has some suspension mods but nothing out of the norm. standard height. maybe an inch more. has blue springs all round. not sure what brand. and koni shocks all round. seems prety tame and in good condition still. everything looks standard.

here is a pic of the turn stop before i adjusted it. i could only turn it two-ish turns before it was running out of thread. also, according to them they adjusted them as much as they could. judging by all the dirt and mud caked on the bolts they didnt even touch them. i had to clean them up before hand. no way my bitumen work carpark has that much loose mud.

Originally Posted by Tombie

I would just get hold of some 12mm UNC bolts a bit longer...

And a nut, so once they are set tighten the nut to lock them in place...

yea thats what ive done. havent fitted them yet. 12mm with a 19mm hex head. 60mm long, threaded all the way. should give me plenty of room.