- 
	
		
                        
                                
                                        
                                                8th November 2016, 04:08 PM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
		
			heater hoses help :)
		
		
				
					
					
				
				
		
			
				
					Long story...V8i Disco. LPG system had been installed (ages ago in 1997 judging by the sticker!). They bypassed the heater unit, so the intake and outflow are both sans hoses.
I have removed the LPG regulator and am now trying to get the hoses back into order!
So...my bottom radiator hose has 2 hoses coming off it...one goes to the overflow bottle, I figured that out from the diagram. I cant figure out where the next hose goes to...This hose they had plumbed into the LPG regulator which was then attached to a connector on the RH side of the manifold by a second hose from the regulator.
Should this hose be okay to run from the second hose coming off the bottom radiator hose and running into the manifold? 
The good news is that I think I found the cause of the overheating as the hoses to and from the LPG regulator both were bone dry!
				
			 
			
		 
			
				
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                8th November 2016, 06:59 PM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Ignore all that! After extensive googling, I have figured out that joining as mentioned above is fine and should be essentially the same as bypassing the heater core 
 Thats the theory anyway!
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                9th November 2016, 06:54 PM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
					
				
		
			
				
					good to see you have it sorted
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
		
		
		
	
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				
				Posting Permissions
			
			
				
	
		- You may not post new threads
 
		- You may not post replies
 
		- You may not post attachments
 
		- You may not edit your posts
 
		-  
 
	
	
	Forum Rules
 
			 
		 
	 
 
  
    Search AULRO.com ONLY! 
 | 
    Search All the Web! 
 | 
  
  
  
  
Bookmarks