Pics attached.
Is that black wire on the second bunch meant to be cut?
What is that thingo?
Hey guys.
I'm trying to mount a new reverse camera that requires you to splice the reverse light positive and negative.
Sounds simple. But i have no idea which wires are the reverse positive and negative at the wire cluster. I have a multimeter if that helps. Pic below
Pics attached.
Is that black wire on the second bunch meant to be cut?
What is that thingo?
yeap. that worked. thanks for bearing with me
RAVE CD has wiring diagrams - get it at https://www.davesitshop.com/emporium/rave-i.html
-----
You have the right to remain silent. Anything you say will be misquoted, then used against you.
-----
1999 Disco TD5 ("Bluey")
1996 Disco 300 TDi ("Slo-Mo")
1995 P38A 4.6 HSE ("The Limo")
1966 No 5 Trailer (ARN 173 075) soon to be camper
-----
Yep. that 'thingo' is indeed the socket for trailer wiring. There is an accessory wiring harness that plugs into that (pigtail) to allow you to connect the plug of your choice at the trailer end and not have to splice into the vehicle wiring with scotch-locks... It's behind the RH rear tail-light.
DiscoClax
'94 D1 3dr Aegean Blue - 300ci stroker RV8, 4HP24 & Compushift, usual bar-work, various APT gear, 235/85 M/Ts, 3deg arms, Detroit lockers, $$$$, etc.
'08 RRS TDV8 Rimini Red - 285/60R18 Falken AT3Ws, Rock slider-steps, APT full under-protection, Mitch Hitch, Tradesman rack, Traxide DBS, Gap IID
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks