Results 1 to 4 of 4

Thread: 300 TDI viscous fan spanner size

  1. 23rd December 2017, 12:45 PM #1
    BarnBiscuit
    BarnBiscuit is offline Fossicker
    Join Date
    Dec 2017
    Location
    Berowra Heights, NSW
    Posts
    16
    Total Downloaded
    0

    300 TDI viscous fan spanner size

    It was reported on another thread the spanner needed to remove the viscous fan is a 32mm for the 200 TDI. Is it the same for the 300 TDI?
    Reply With Quote Reply With Quote
  2. 23rd December 2017, 01:16 PM #2
    rangieman's Avatar
    rangieman
    rangieman is offline Swaggie
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    32mm
    Reply With Quote Reply With Quote
  3. 24th December 2017, 06:27 AM #3
    AK83
    AK83 is offline TopicToaster Supporter
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,517
    Total Downloaded
    0
    I got mine off ebay for about $20, 32 one end(300 Tdi) and 34 other end(D2 V8).

    Alternatively, you could make one from a strip of flat bar, about 5mm thick.
    A slight kink at the open end to assist with keeping the spanner end located straight onto the hub nut.
    And just remember it's reverse threaded.
    And when fitting, don't try to tighten it.
    I just spin mine on(what feels like undoing it) by hand till it stops, and it tightens itself every time, so it needs a slight crack/whack to remove every time.
    Arthur.

    All these discos are giving me a heart attack!

    '99 D1 300Tdi Auto ( now sold :( )
    '03 D2 Td5 Auto
    '03 D2a Td5 Auto
    Reply With Quote Reply With Quote
  4. 24th December 2017, 08:38 AM #4
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by AK83 View Post
    And just remember it's reverse threaded.
    And when fitting, don't try to tighten it.
    I just spin mine on(what feels like undoing it) by hand till it stops, and it tightens itself every time, so it needs a slight crack/whack to remove every time.
    Ditto this, and use some anti-seize on the threads.
    It's so easy to tap off if you do this.
    Reply With Quote Reply With Quote
« engine vibrations between 1800 to 2000 revs fixed | D1 300TDi Manual with engine issue »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!