Stop eating iced donuts......![]()
Hi Guys , Noticed today that the drivers seat in the disco had really dropped in the middle . Had a look underneath and the seat and the stretchy fabric had torn down the centre . Am I able to fix this myself ( have no idea about seats ) or who do i take it to ? Thanks![]()
Last edited by Fusion; 30th April 2008 at 06:03 PM.
Stop eating iced donuts......![]()
It's a common problem, unfortunately.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
You can get a replacement seat cushion from LR. I got a replacement a couple of years ago for $99. You just take off the cover and swap it over.
The part number is: MXC7870
97 D1 V8 SE manual - loud & locked - RPI Optimax & some toys
09 D3 HSE
Sold and missed: 03 D2a V8 auto
LROCV member
I love it when a plan comes together!
John "Hannibal" Smith
Regrettably, it's not the cushion, it's the diaphragm that tears. I replaced it in my daughter's Disco. I've seen a number that are like this.
MXC7870 is the foam cushion that sits above the diaphragm..
The diaphragm varies depending on model year as far as I can see. It might be MTC9931 Diaphragm, Cushion. It used to be about $40
Unfortunately, my parts catalogue is deficient in this area.
What is your D1 VIN?
Late edit: That might be the wrong part no. It's also used on the RR classic and the pic there is much better. It doesn't look like our D1
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Same here. I stripped the seat and removed the diaphragm. My Mrs sewed a strip of carpet binding over each of the tears and it's as good as new (well...maybe not quite so good but good enough). The foam was also pretty compressed so I got some from an old seat back cushion and cut it to bring the profile back to where it should be. The seat feels fine and I can now see over the steering wheel hub to read the instruments (what there are of them).
Well i fixed the seat . I bought a seat off V8Landy out of a wreck and used the mesh from that seat and put it into mine ... was a lot cheaper buying a second hand seat .
I would like to replace both front seats in mine D1 - 1992. Do you mind if I ask which wrecker you got the seat from.
Best
Jay
So does anyone know specifically where to get this diaphragm from ? Rovacraft in Perth used to have them but they've been out of stock for about 18 months, apparently they also fit the older models
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks