I have polyairs in mine with a minimum pressure of 5psi (to stop them from pinching) and a maximum pressure of 30psi. I am unsure whether the coil rites use the same pressures though.
I brought a S1 disco with air bags already installed in the rear springs. I'm guessing they are firestone coil-rite bags based on colour.
Can you guys advise the pressure i should be running them at?
I realise that it depends on load so maybe just a maximum pressure will do. Dont want to pop them.
Thanks guys.
I have polyairs in mine with a minimum pressure of 5psi (to stop them from pinching) and a maximum pressure of 30psi. I am unsure whether the coil rites use the same pressures though.
I have coil rites (blue). As said previously the minimum is 5 psi and max is 35 psi.
I normally drive around with about 10 psi. When loaded I go up to 25 or 30 psi.
With no load and 25psi body roll is reduced greatly.
97 D1 V8 SE manual - loud & locked - RPI Optimax & some toys
09 D3 HSE
Sold and missed: 03 D2a V8 auto
LROCV member
I love it when a plan comes together!
John "Hannibal" Smith
been running 40psi in mine for about 18 months
cheers
blaze
Thanks for the advice lads. Much appreciated.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks