Results 1 to 8 of 8

Thread: Factory Spot Light Switch

  1. #1
    Join Date
    Oct 2007
    Posts
    220
    Total Downloaded
    0

    Factory Spot Light Switch

    G'Day All,

    Just fitted my nudge bar so now I can mount my spotties. Before I hack up one of the blanking switch to fit and aftermarket switch in it did any model S1Disco has factory fitted spot lights and therefore a factory switch I could use?

    If so I'm after one ASAP.


    Cheers.

  2. #2
    Join Date
    Nov 2007
    Location
    Central Coast NSW
    Posts
    72
    Total Downloaded
    0
    Heaps of them available. I have several spares. No need to hack at the blanking panels.

  3. #3
    Join Date
    Feb 2008
    Location
    sunny Hobart
    Posts
    1,293
    Total Downloaded
    0
    stooge has just done this

    http://www.aulro.com/afvb/discovery-...y-install.html

    neat install, keeps everything looking standard

  4. #4
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    My rangies over the years and 98 disco have all had factory fitted rear fog lights. I don't know about early discos.

    In the update disco I, the fog light switch is on the left side of the instrument nacelle. If you have an unused switch position on that side you could use a 2nd rear fog light switch for spot lights.

  5. #5
    Join Date
    Oct 2007
    Posts
    220
    Total Downloaded
    0
    Yes I have a rear fog lights and switch but if there if a specific spot light switch I'd like to purchase one.

    Send me a PM if you can help out.

    Cheers

  6. #6
    It'sNotWorthComplaining! Guest
    Yes there is on the Disco1 it is the same as the fog light switch just it sits on the opposite side panel. The wiring should be under the switch position and should be plug and play. I have both on mine

  7. #7
    Join Date
    Oct 2007
    Posts
    220
    Total Downloaded
    0
    It'sNotWorthComplainging!,
    I don't have the extra switch on mine. They are blanks. Maybe its related to the model? Its SE V8.

    Can anyone point me into the right direction for getting one of these switches.

    Thanks for the help so far.

  8. #8
    Join Date
    Apr 2007
    Location
    Newcastle NSW
    Posts
    362
    Total Downloaded
    0
    Rezley

    I have fitted my spotties, both off the bullbar and the roof ones work off seprate switches in the instrument surround as discussed by a few others.

    What I did was got two fog light switches off a wrecked Disco from my local Land Rover wrecker. From memory he charged me 10 bucks for the two. Make sure the switches you get latch on (ie push to turn on, holds the switch closed, then to turn off push it again). For some reason some of the fog light switches I have seen are only momentarily on (ie only turn on when you've got them pressed down, pretty useless as spotties switch).

    Wiring them in then is a piece of cake, just like wiring in a normal light switch.

    Works a treat and looks factory.

    Cheers

    Goldey
    Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
    Gone: 98 Disco 300tdi Auto, and some extras

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!