Results 1 to 4 of 4

Thread: SLS Heights in Nanocom

  1. 13th March 2011, 10:51 AM #1
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0

    SLS Heights in Nanocom

    Need a favour. Could someone plug in their Nanocom and have a look at what the STD and extended height readings are for their SLS please.

    I'm trying to graph different height readings to actual physical dimensions in an effort to make life easier.
    Also, if you have a Nanocom1, IIRC you can pulse adjust it?
    Evo runs preset pump times making it hard to get an incremental adjustment.

    Cheers

    Andrew

    Sent from my backyard TeePee using smoke signals.
    Reply With Quote Reply With Quote
  2. 13th March 2011, 03:21 PM #2
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    Don't worry, found LR measurements.......



    And a leaky bag.......


    DOH!!!


    Sent from my backyard TeePee using smoke signals.
    Reply With Quote Reply With Quote
  3. 13th March 2011, 04:09 PM #3
    tailslide's Avatar
    tailslide
    tailslide is offline Master
    Join Date
    Jun 2010
    Location
    Bayswater, Western Australia
    Posts
    717
    Total Downloaded
    0
    Doh and I just went out and measured mine.

    Here they are anyway:

    Normal mode LR 152 RR 143
    Extended mode LR 180 RR 168

    Distance from top of wheel arch to bottom of rim (std 16" alloy)
    Normal mode LR 693mm RR 700mm
    Extended mode LR 739mm RR 732mm

    Distance from top of wheel arch to road (std 235/70R16)
    Normal mode LR 812mm RR 820mm
    Extended mode LR 861mm RR 847mm

    How close am I to standard? And I just cleared an extendard compressor error message, two bags are on order from Padocks...

    Cheers
    Ron
    Reply With Quote Reply With Quote
  4. 13th March 2011, 06:27 PM #4
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    Actually pretty much the same as I had when I set (as close as i could get it) to the levels below.

    I actually found the measurements LR use for the calibration blocks LRT-64-003/1 & LRT-64-003/2

    Measuring from the tip of the bumpstop to the axle seat:
    STD height 61.5mm
    OFFROAD: 100mm

    Thanks for the reply Ron!

    Andrew



    Sent from my backyard TeePee using smoke signals.
    Reply With Quote Reply With Quote
« D2 Front window electrics | planned trip - crossbars n roof pod »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!