Thread: Nanocom help needed to program key fob! Penrith area

Can KLR Automotive in Kingswood do it? They have Autologic and Land Rover Testbook.

thanxs mate...will give them a call. But i'm hoping for a kind soul with a nanocom to do it sans commercial rate!

Originally Posted by RAVOLVER

thanxs mate...will give them a call. But i'm hoping for a kind soul with a nanocom to do it sans commercial rate!

I have Testbook but I have no idea how to program a fob

Its pretty simple with Nanocom, probably even easier with Testbook.

It will be under the BCU section in "security" or "programming", just follow the instructions.

As long as the key fob is new with the Barcode tag it should take less than 5 mins.

Before you do it tho, "pop" the current key open and look at the 6 figure code on the chip and make note of it. The reason for this is so you can see what "slot" its currently programmed to when you go to program the new one. It will stop you overwriting it by mistake. NOTE Testbook will show a long code, but "within" that code will be the 6 figure one you noted.

The keys can go in any slot 1 - 4. Keep the current key "out of the car" when testing the new one.

Thanxs Urbanpanzer, P38,

Ok..let me do some homework about how to get this done properly with a Testbook before i drive over.

P38...Whereabouts are you at in western Sydney?

Originally Posted by RAVOLVER

P38...Whereabouts are you at in western Sydney?

Just across the river from you.

I have a Hawkeye, have programmed a few Td5's PLIP's with it.
Happy to help if u want to come to me
I'm about 1hr's drive from Penrith

Alright p38,

thanxs, i'll try to cut the key on friday and see if i could "swim" across the Nepean sometime this weekend or next week! i'll send u a PM. cheers mate!

Thanxs for the offer Paulie...i'll try to get it done with p38's testbook first and see if we could work it out.